4A-GE engine mix - question

Threaded Mode | Linear Mode

4A-GE engine mix - question

11-26-2010, 06:55 PM

Post: #2

Ivan141 Offline

Super Moderator

Posts: 6,423
Joined: Sep 2004
Reputation: 0

Yes, smallport and bluetop block&head will mix. Compression is all down to the pistons, so in theory, you'll get the higher compression. But smallport blocks are hard to find. Furthermore, compression is not all that much higher than euro bluetop.. it's mostly the american dudes with the low compression pistons that have much to gain there.
If you're building a bottom end anyway, it might be interesting to consider a 7AGE.

FABRICA MI DIEM, PVNC!

« Next Oldest | Next Newest »

Messages In This Thread

4A-GE engine mix - question - Maren - 11-26-2010, 03:55 PM

[] - Ivan141 - 11-26-2010 06:55 PM

[] - Maren - 11-26-2010, 07:40 PM

[] - oldeskewltoy - 11-26-2010, 07:42 PM

[] - Uzelac - 03-04-2011, 08:10 PM

[] - oldeskewltoy - 03-05-2011, 08:50 AM

[] - Uzelac - 03-05-2011, 02:54 PM

[] - oldeskewltoy - 03-08-2011, 07:56 PM

[] - Uzelac - 03-09-2011, 01:55 AM

[] - oldeskewltoy - 03-09-2011, 02:05 AM

[] - Uzelac - 03-09-2011, 03:55 AM

[] - Project D - 03-09-2011, 02:26 PM

[] - Uzelac - 03-09-2011, 03:04 PM

[] - oldeskewltoy - 03-09-2011, 07:29 PM

[] - Uzelac - 03-10-2011, 02:33 AM

[] - oldeskewltoy - 03-10-2011, 03:59 AM

[] - Bean - 03-10-2011, 09:51 AM

[] - Project D - 03-10-2011, 12:22 PM

[] - Uzelac - 03-10-2011, 01:13 PM

[] - Nomuken - 03-10-2011, 01:56 PM

[] - Uzelac - 03-10-2011, 02:48 PM

[] - Project D - 03-10-2011, 03:45 PM

[] - Uzelac - 03-10-2011, 04:57 PM

[] - Bean - 03-10-2011, 05:41 PM

[] - Uzelac - 03-10-2011, 05:50 PM

[] - Project D - 03-10-2011, 05:57 PM

[] - Bean - 03-10-2011, 05:58 PM

[] - oldeskewltoy - 03-11-2011, 04:34 AM

[] - Uzelac - 03-19-2011, 01:48 PM

[] - oldeskewltoy - 03-20-2011, 05:04 AM

[] - Uzelac - 03-20-2011, 10:26 AM

[] - Uzelac - 11-02-2011, 12:29 AM

[] - Bean - 11-02-2011, 08:43 AM

[] - Uzelac - 11-02-2011, 10:35 AM

[] - Uzelac - 11-02-2011, 10:44 AM

[] - Bean - 11-02-2011, 12:02 PM

[] - NoHachi - 11-02-2011, 12:25 PM

[] - Uzelac - 11-02-2011, 12:40 PM

[] - Bean - 11-03-2011, 06:39 AM

[] - Uzelac - 11-03-2011, 11:41 AM

[] - Bean - 11-03-2011, 11:53 AM

[] - Uzelac - 11-03-2011, 12:36 PM

[] - NoHachi - 11-03-2011, 12:44 PM

[] - Uzelac - 11-03-2011, 02:37 PM

[] - Bean - 11-03-2011, 02:40 PM

[] - Uzelac - 11-03-2011, 03:03 PM

[] - Project D - 11-03-2011, 03:18 PM

[] - Uzelac - 11-03-2011, 03:51 PM

[] - NoHachi - 11-03-2011, 03:54 PM

[] - Bean - 11-03-2011, 03:56 PM

[] - Uzelac - 11-03-2011, 04:08 PM

[] - Uzelac - 11-03-2011, 04:11 PM

[] - Project D - 11-03-2011, 04:11 PM

[] - Uzelac - 11-03-2011, 04:15 PM

[] - NoHachi - 11-03-2011, 04:20 PM

[] - Project D - 11-03-2011, 04:23 PM

[] - oldeskewltoy - 11-04-2011, 07:28 PM

[] - NoHachi - 11-04-2011, 08:27 PM

[] - oldeskewltoy - 11-04-2011, 09:38 PM

[] - Uzelac - 11-05-2011, 12:48 AM

[] - Uzelac - 12-05-2011, 01:15 PM

[] - NoHachi - 12-05-2011, 05:21 PM

[] - Uzelac - 12-06-2011, 02:46 PM

[] - Uzelac - 01-14-2012, 03:08 AM

[] - totta Crolla - 01-14-2012, 11:50 AM

[] - Uzelac - 01-17-2012, 05:10 PM

[] - Uzelac - 03-07-2012, 11:31 AM

[] - Bean - 03-07-2012, 11:36 AM

[] - Uzelac - 03-07-2012, 12:08 PM

[] - Bean - 03-07-2012, 12:23 PM

[] - Uzelac - 03-07-2012, 12:36 PM

[] - oldeskewltoy - 03-08-2012, 04:13 AM

[] - Bean - 03-08-2012, 12:35 PM

[] - Uzelac - 03-08-2012, 01:01 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Question about 4AG 20v Engine Block	CHACAMAN	1	3,225	06-10-2022 05:17 PM Last Post: oldeskewltoy
	Bluetop Engine Rebuild multiple question Goal 150-160hp	Hanzo	16	15,838	04-19-2021 10:08 PM Last Post: Hanzo
	toyota a series engine....can a fwd corolla engine be used	210 datsun guy	5	10,660	10-30-2013 11:18 PM Last Post: banpei
	RE: mix and match the 4AGE..	panda_tureno86	4	6,610	01-18-2012 08:20 PM Last Post: panda_tureno86
	Engine question.	caper	24	29,037	07-25-2010 07:04 PM Last Post: caper

User(s) browsing this thread: 2 Guest(s)