|
pinion adjustment
|
|
11-10-2010, 07:33 AM
Post: #10
|
|||
|
|||
|
TO clarify. As a quick test using washers and longer bolts you can space the trans/crossmember down or raise the trans mount off the crossmember to change the driveline included angle (U-joint operating angles) to possibly temporarily reduce vibration & verify what kind of change you need.
Making adjustable lower arms is fine. 4mm of movement (if thats the correct amount) shouldn't induce any kind of series binding on most setups. Andrew |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
pinion adjustment - totta Crolla - 11-05-2010, 12:39 PM
[] - totta Crolla - 11-06-2010, 07:30 PM
[] - totta Crolla - 11-08-2010, 11:35 AM
[] - totta Crolla - 11-09-2010, 10:55 PM
[] - assassin10000 - 11-10-2010 07:33 AM
[] - totta Crolla - 11-10-2010, 07:45 PM
[] - totta Crolla - 11-10-2010, 10:38 PM
[] - assassin10000 - 11-11-2010, 03:58 AM
[] - totta Crolla - 11-12-2010, 10:46 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Clutch Slip - Adjustment | DMC | 3 | 1,028 |
04-25-2025 11:29 PM Last Post: DMC |
|
| Handbrake adjustment discs? | DMC | 8 | 3,111 |
03-10-2024 08:08 PM Last Post: DMC |
|
| DIY: a quick outline on why & how to set pinion angle. | assassin10000 | 9 | 20,473 |
12-21-2016 10:28 PM Last Post: ditn |
|
| Camber adjustment vs original struts | Lt86 | 9 | 10,695 |
05-07-2015 09:45 PM Last Post: zenki |
|
| Ring & pinion ratio. | izanagi | 27 | 31,142 |
07-05-2014 07:35 PM Last Post: assassin10000 |
|
User(s) browsing this thread: 1 Guest(s)