Halfshaft moving in & out - strange problem

[max_ae86]

max_ae86 Wrote:I will try to fix it somehow. I don't feel very comfortable with it.
I can:
1) Put liquid gasket
2) Add an extra ring cover inside the plate and prevent extra play
3) To hit inner surface of housing in several places and make it rough

At the end I simply cut a piece of thin alu-plate and put inside. It seems to be tight enough, I had to hit axle 20 times with a big hammer very hard to go back. I hope it will stay in place from now on. :wink:

[/img]