|
Wheel not running straight - possible issues?
|
|
05-14-2010, 12:17 AM
Post: #8
|
|||
|
|||
|
Some discs are a tight fit onto the halfshaft. I had an issue like you are having and I discovered that there was some rusting on the outer edge of the halfshaft flange and some imperfections inside the disc where it slides over the flange. These two combined ensured that the disc did not sit true on the flange and then the wheel ran out of true.
You could try bolting the disc on without the wheel to see what it's like then. Maybe a trolley jack under the diff. and running on tickover in 1st gear. hth, TC An analogue brain in a digital World |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Wheel not running straight - possible issues? - Jezza_hr - 05-06-2010, 02:38 PM
[] - totta Crolla - 05-14-2010 12:17 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Spare wheel & spare wheel carrier | ondafly | 6 | 1,148 |
01-19-2026 01:00 PM Last Post: ondafly |
|
| No idle below 2000 rpm rich running | Steller Engineering | 3 | 3,378 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
| Running issues | sam3007 | 6 | 5,309 |
06-26-2022 01:34 PM Last Post: Dave W |
|
| 4age 16v running roughly - diagnostics shows unknown code | Ryo | 8 | 11,229 |
11-09-2020 10:51 AM Last Post: totta Crolla |
|
| Over heating issues | MIGGZFSU | 12 | 16,064 |
05-11-2017 05:09 PM Last Post: MIGGZFSU |
|
User(s) browsing this thread: 1 Guest(s)