Compression - How much is too much?
07-07-2009, 12:15 PM
Post: #20
 
NoHachi Wrote:Higher pressure allows for better efficiency. You get more energy from the same cylinder charge.

Search around on google, there will be plenty explanations. One example:
http://www.popularhotrodding.com/tech/03...index.html

I don't want to deny any positive effects of the higher compression. I just said, higher compression will consume more air, and the ECU will compensate for it. Measure the air volume either case, measure the AFR accordingly, you will see the ecu trying to keep up.
But have a look from the other side: use slightly bigger cams, no shaving, no thin gasket, nothing. How the hell the ecu can compensate (up to a limit, of course) for the different than stock lift and duration, if it can't measure the air? Hence the question, what do you think what is the correlation of the static and dynamic compression?

http://www.ae86.hu
Visit this user's website Find all posts by this user


Messages In This Thread
Compression - How much is too much? - adam - 07-03-2009, 05:16 PM
[] - jondee86 - 07-04-2009, 03:49 AM
[] - oldeskewltoy - 07-04-2009, 04:49 AM
[] - adam - 07-04-2009, 05:51 AM
[] - tolisspi - 07-04-2009, 08:43 AM
[] - jondee86 - 07-04-2009, 09:21 AM
[] - ZDoman - 07-04-2009, 01:13 PM
[] - adam - 07-04-2009, 01:43 PM
[] - ZDoman - 07-04-2009, 02:24 PM
[] - adam - 07-04-2009, 02:46 PM
[] - tolisspi - 07-04-2009, 03:18 PM
[] - ZDoman - 07-04-2009, 05:46 PM
[] - oldeskewltoy - 07-04-2009, 07:44 PM
[] - adam - 07-05-2009, 06:06 AM
[] - oldeskewltoy - 07-05-2009, 05:21 PM
[] - XJS - 07-07-2009, 10:18 AM
[] - NoHachi - 07-07-2009, 11:50 AM
[] - XJS - 07-07-2009, 11:57 AM
[] - NoHachi - 07-07-2009, 12:02 PM
[] - XJS - 07-07-2009 12:15 PM
[] - NoHachi - 07-07-2009, 12:45 PM
[] - XJS - 07-07-2009, 12:51 PM
[] - NoHachi - 07-07-2009, 01:07 PM
[] - XJS - 07-07-2009, 01:09 PM
[] - mcm95403 - 07-08-2009, 07:19 AM
[] - adam - 07-08-2009, 08:24 AM
[] - oldeskewltoy - 07-08-2009, 07:07 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  AE86 Driveshaft too long? [SOLVED] MyCrazyGarage 12 10,539 07-28-2022 10:48 PM
Last Post: banpei
  Can you convert your 86 back too the original state? gh0st 7 4,540 04-25-2022 04:25 PM
Last Post: gh0st
  82mm Stock compression Pistons apardal 4 3,918 11-24-2021 04:26 PM
Last Post: apardal
  working out compression ratios kazi 2 4,458 07-16-2019 08:22 PM
Last Post: oldeskewltoy
  4age hitting gas too quick means engine stalls - what is the issue? Ryo 20 34,416 06-27-2018 11:15 PM
Last Post: Ryo

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication