Tutorial : Megasquirting an European (MAP) AE86 (4age)
03-30-2009, 07:30 PM
Post: #42
 
irishtwincam Wrote:24+4 should cause problems?
The 4 tooth are too close to 24 tooth.

/\/\/\/\/\/\
--------/\--

There is not enough lead time to allow triggering without reseting
"degree counter" in the ecu software?
Events are too close together and too close to TDC.
Also Im suprised you ahve success witht he stock loom too.
EURO AE86 has NE, G and G- wires that are not shielded.
Last time we tried this we had LOTS of noise on the wires.

On this setup megasquirt is used in MSnS mode .
Only the 4 tooth wheel is used.
The shield of the wire is not very important since the VR sensor wire is about 25cm long only.
After that it arrives to the MAF ignitor where it is converted to digital. After it is in digital mode the shield is not very important.
Visit this user's website Find all posts by this user


Messages In This Thread
[] - gon - 08-24-2008, 01:46 AM
[] - shanemck - 08-24-2008, 12:55 PM
[] - BOOMEX - 08-24-2008, 02:37 PM
[] - F0Bman - 08-27-2008, 05:32 AM
[] - gon - 08-27-2008, 08:38 PM
[] - apardal - 08-28-2008, 11:13 PM
[] - CIVER - 11-24-2008, 05:09 AM
[] - AE86_Z - 01-05-2009, 08:42 PM
[] - ts@n@k@s - 01-06-2009, 02:51 AM
[] - will_drift_4_food - 02-07-2009, 08:15 AM
[] - will_drift_4_food - 02-07-2009, 09:09 AM
[] - gon - 02-07-2009, 12:34 PM
[] - will_drift_4_food - 02-08-2009, 10:19 AM
[] - gon - 02-08-2009, 12:59 PM
[] - will_drift_4_food - 02-08-2009, 03:06 PM
[] - AE86_Z - 03-20-2009, 11:15 PM
[] - will_drift_4_food - 03-20-2009, 11:37 PM
[] - AE86_Z - 03-21-2009, 11:19 PM
[] - will_drift_4_food - 03-22-2009, 04:25 AM
[] - AE86_Z - 03-23-2009, 12:52 PM
[] - will_drift_4_food - 03-23-2009, 01:39 PM
[] - gon - 03-23-2009, 03:06 PM
[] - AE86_Z - 03-23-2009, 11:38 PM
[] - AE86_Z - 03-24-2009, 10:18 PM
[] - gon - 03-24-2009, 10:31 PM
[] - AE86_Z - 03-29-2009, 09:56 PM
[] - gon - 03-30-2009, 12:36 AM
[] - Uzelac - 03-30-2009, 01:01 AM
[] - AE86_Z - 03-30-2009, 09:45 AM
[] - irishtwincam - 03-30-2009, 12:35 PM
[] - gon - 03-30-2009, 12:39 PM
[] - Uzelac - 03-30-2009, 01:01 PM
[] - gon - 03-30-2009, 01:19 PM
[] - Uzelac - 03-30-2009, 01:36 PM
[] - AE86_Z - 03-30-2009, 01:46 PM
[] - irishtwincam - 03-30-2009, 02:34 PM
[] - AE86_Z - 03-30-2009, 03:02 PM
[] - AE86_Z - 03-30-2009, 03:12 PM
[] - Uzelac - 03-30-2009, 04:53 PM
[] - irishtwincam - 03-30-2009, 05:07 PM
[] - gon - 03-30-2009 07:30 PM
[] - irishtwincam - 03-31-2009, 10:13 AM
[] - gon - 03-31-2009, 03:23 PM
[] - irishtwincam - 04-01-2009, 11:59 PM
[] - AE86_Z - 04-23-2009, 09:06 AM
[] - isac - 04-27-2009, 04:02 PM
[] - gon - 04-27-2009, 07:24 PM
[] - AE86_Z - 04-28-2009, 08:51 AM
[] - isac - 04-28-2009, 08:28 PM
[] - BOOMEX - 05-11-2009, 12:29 AM
[] - gon - 05-11-2009, 01:00 AM
[] - BOOMEX - 05-11-2009, 11:37 AM
[] - isac - 05-11-2009, 04:27 PM
[] - BOOMEX - 05-12-2009, 10:54 AM
[] - Diskovod - 06-03-2009, 02:17 PM
[] - Chrisso - 08-18-2009, 05:05 AM
[] - irishtwincam - 04-08-2010, 04:03 PM
[] - irishtwincam - 04-08-2010, 04:46 PM
[] - pack - 07-09-2013, 11:17 AM
[] - isac - 07-09-2013, 12:53 PM
[] - pack - 07-15-2013, 05:52 PM
[] - pack - 01-09-2014, 12:10 PM
[] - Bean - 01-09-2014, 08:29 PM
[] - pack - 01-09-2014, 08:33 PM
[] - Bean - 01-09-2014, 08:36 PM
[] - pack - 01-09-2014, 11:12 PM
[] - Bean - 01-09-2014, 11:23 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  AFM to Map Conversion ps13michi 3 4,406 01-06-2022 10:34 AM
Last Post: ps13michi
  Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP mister86 12 13,736 02-10-2020 06:39 PM
Last Post: Power_uP
  European/UK vs Japanese Levin "Glass Grill" mad.matt 3 6,854 10-20-2017 02:47 PM
Last Post: mad.matt
  extracted freedom ecu 16v ignition map ditn 7 10,240 08-22-2016 10:01 AM
Last Post: ditn
  smallport question AFM or MAP? fax0815 5 9,263 05-17-2014 05:07 AM
Last Post: jondee86

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication