d3nso's little AE86 N2 build

[Jan Pedersen]

That shell looks pretty darn good!

[d3nso]

Yea it's not your typical rustbucket AE86 but I already found some spots that need some metal work to be done. I'm about 85% done with scraping off the old gunk, it takes ages to remove with a chisel and a trowel. Have about 35-40h spent already on this mess, for the most part alone...
Next up is making room for the new equal 4 link setup and other metal work so stay tuned

[d3nso]

So long time no update.

Here some pics from the passt couple months:

started with the welding. Not the prettiest welds but they will hold up fine and I can proudly say this car is build not bought in the end










and made some room for the T3 goodies:






More to come

[midnightmach]

Nice work are you stitch welding the whole car?

[d3nso]

Yes l'm going to stitch and spotweld the whole car. Not done yet, the pic from the spotwelded rear window is from last week. If I weren't so lazy the welding would be done by now

[mad.matt]

(11-06-2017 10:40 PM)d3nso Wrote:  

I bought the ones with the T3 Text on the top I wonder if they weigh any more or less.
Didn't buy the equal length boxes though, might be something I do at a later date, see how I get on with my existing set up

Good luck with the welding!

[d3nso]

I could try to weigh them next time at the garage if you really want to know

[mad.matt]

(11-11-2017 12:32 PM)d3nso Wrote:  I could try to weigh them next time at the garage if you really want to know

Naaah, I'm not that anal
Cheers though