|
cams cams cams
|
|
09-13-2013, 07:30 PM
Post: #45
|
|||
|
|||
|
there can be differences in cam gears.... mostly based on the pin diameters....
check for pin fit... either no fit... T3 type with an "opened" up pin hole ![]() or loose fit - SS Works timing pulleys ![]() I eventually went with the T3, I opened them up for a perfect zero tolerance (no slop) fit Oh... there is another problem with the T3 pulleys... I was able to overcome once they told me... they mis-machined the location of the opening for the intake pin... they did tell me how to fix it... I made a diagram to better understand how to set T3 timing
Dan - You can | OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
cams cams cams - megabob - 08-29-2013, 01:31 PM
[] - Alex170984 - 08-30-2013, 04:53 PM
[] - oldeskewltoy - 08-30-2013, 08:53 PM
[] - oldeskewltoy - 09-04-2013, 09:17 PM
[] - totta Crolla - 09-04-2013, 09:25 PM
[] - totta Crolla - 09-04-2013, 10:31 PM
[] - oldeskewltoy - 09-04-2013, 11:53 PM
[] - totta Crolla - 09-05-2013, 12:48 AM
[] - Alex170984 - 09-12-2013, 02:49 PM
[] - Alex170984 - 09-12-2013, 02:51 PM
[] - Alex170984 - 09-13-2013, 02:56 PM
[] - oldeskewltoy - 09-13-2013 07:30 PM
[] - oldeskewltoy - 09-20-2013, 07:44 PM
[] - totta Crolla - 09-20-2013, 11:44 PM
[] - Alex170984 - 09-23-2013, 03:11 PM
[] - totta Crolla - 09-24-2013, 10:44 PM
[] - Alex170984 - 10-24-2013, 01:17 PM
[] - Alex170984 - 10-24-2013, 04:47 PM
[] - oldeskewltoy - 10-24-2013, 10:46 PM
|
User(s) browsing this thread: 1 Guest(s)



![AEU86 AE86 - [Image: AEU86 AE86 - ]](http://i79.photobucket.com/albums/j143/oldeskewltoy/untitled11.jpg)
![AEU86 AE86 - [Image: AEU86 AE86 - ]](http://i79.photobucket.com/albums/j143/oldeskewltoy/untitled9-1.jpg)
