Velocity Stacks - Which, Where, How much?
04-29-2008, 04:29 PM
Post: #1
Velocity Stacks - Which, Where, How much?
I just bought an ITB setup for my engine and I'm looking for velocity stacks for it. Besides T3, which stacks and where can I buy for silvertop?

Are there any carb stacks that can bolt on this setup? They come a lot cheaper than T3, for example, and look the same. I'm just not sure about the size and bolt pattern.

Best regards
Find all posts by this user
04-29-2008, 05:25 PM
Post: #2
Velocity Stacks - Which, Where, How much?
I will follow this. i have also silver itb´s and need the stacks:-)
Find all posts by this user
04-29-2008, 05:26 PM
Post: #3
Velocity Stacks - Which, Where, How much?
I'll go for these:
[Image: AEU86 AE86 - Velocity Stacks - Which, Where, How much?]

They are €200 for the set...

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - Velocity Stacks - Which, Where, How much?]
Visit this user's website Find all posts by this user
04-29-2008, 05:27 PM
Post: #4
Velocity Stacks - Which, Where, How much?
check here guys.
You need 48 mm diam...
http://www.jenvey.co.uk/

[Image: AEU86 AE86 - Velocity Stacks - Which, Where, How much?]
Find all posts by this user
04-29-2008, 05:44 PM
Post: #5
Velocity Stacks - Which, Where, How much?
Jan, you just missed the where question!! Cool

By the way, what's the inside diameter of the ST ITB's? I heard it was 43mm... and the BT 45mm...

Not sure though!
Find all posts by this user
04-29-2008, 06:15 PM
Post: #6
Velocity Stacks - Which, Where, How much?
48 both.
Inside Diameter,yes.
The diference is on the holes.
for S/T you can use from Peugeot, the holes are the same.
You only have to slighty modify the lip (top end) of the velocity stack, because you are going to have a small contact there....

[Image: AEU86 AE86 - Velocity Stacks - Which, Where, How much?]
Find all posts by this user
04-29-2008, 07:41 PM
Post: #7
Velocity Stacks - Which, Where, How much?
I've heard that it was 45 and 48 mm Confused

Apardal, well maybe i didn't quite answer you question but unless you are interested in these stacks and are willing to pay €200 for them there isn't much point in telling you where to get them Wink

I can order them here in Denmark if you want them... Here is a link: http://www.sitecenter.dk/sjctoyota/hjemmeside/

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - Velocity Stacks - Which, Where, How much?]
Visit this user's website Find all posts by this user
04-30-2008, 12:27 PM
Post: #8
Velocity Stacks - Which, Where, How much?
Measured them yesterday and the biggest inner diameter at the top is around 46.5mm.

Best regards
Find all posts by this user
04-30-2008, 03:38 PM
Post: #9
Velocity Stacks - Which, Where, How much?
apardal Wrote:Measured them yesterday and the biggest inner diameter at the top is around 46.5mm.

Best regards

My measure with Vernier caliper is 47mm
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  4age 16v engine which is it ? Apsogos 12 10,443 11-03-2014 12:13 PM
Last Post: Apsogos
  Which Color??? oldeskewltoy 11 7,996 05-27-2014 04:22 AM
Last Post: AlexKTM
  which is the best quality flywheel brand for 4age smallport? LyndonAE86 NZ 9 8,239 12-06-2012 01:20 AM
Last Post: Bean
  How much did you paid for you TOYOTA AE86??? kennedy8383 11 7,742 09-07-2011 09:16 PM
Last Post: fax0815
  How much you recon this rare set SSR CASABLANCA rims worth? FT86 10 10,402 04-29-2011 02:05 PM
Last Post: FT86

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication