Tutorial : Megasquirting an European (MAP) AE86 (4age)
07-09-2013, 12:53 PM
Post: #61
Tutorial : Megasquirting an European (MAP) AE86 (4age)
You could add some advance while reaching some optimal cooling set point and/ or open the idle valve more. Keep an eye in AFR values because more advance or air will burn more lean.

IAT/CLT Related Ignition

Warm up mode

pack Wrote:So i have my car running ITB's the way gon explained.

Car is working now and i just have a question.

In a cold start when i crank the engine, the idle is way too low (700rpm)

But when the car warms up the rotation goes to like (1400rpm)

I'm using a ICV (idle control valve) with the itb's.

Anyone? Smile
Find all posts by this user
07-15-2013, 05:52 PM
Post: #62
Tutorial : Megasquirting an European (MAP) AE86 (4age)
Solved! Thumbs up!
Find all posts by this user
01-09-2014, 12:10 PM
Post: #63
Tutorial : Megasquirting an European (MAP) AE86 (4age)
Hi everyone!

Anyone with ignition tables for a stock engine and/or tuned engine?

16V

Thanks
Find all posts by this user
01-09-2014, 08:29 PM
Post: #64
Tutorial : Megasquirting an European (MAP) AE86 (4age)
check on diyautotune.com - there's an msq available for download that comes with the mspnp

AE86 ex-daily
Visit this user's website Find all posts by this user
01-09-2014, 08:33 PM
Post: #65
Tutorial : Megasquirting an European (MAP) AE86 (4age)
But the ignition map is not tuned for the 4AGE.

It has the basic setup to start the engine, but not a ignition map tuned in dyno. Thumbs up!
Find all posts by this user
01-09-2014, 08:36 PM
Post: #66
Tutorial : Megasquirting an European (MAP) AE86 (4age)
pack Wrote:But the ignition map is not tuned for the 4AGE.

It has the basic setup to start the engine, but not a ignition map tuned in dyno. Thumbs up!

every engine is different so there is no perfect map that anyone can send you. It should be good enough to get you started though. Also I think it was made on a dyno as they took it from their own MR2 build, before they went turbo.

AE86 ex-daily
Visit this user's website Find all posts by this user
01-09-2014, 11:12 PM
Post: #67
Tutorial : Megasquirting an European (MAP) AE86 (4age)
I have mine set up running with no problems.... But wanted to make sure the ignition timings are correct or am i using values that are restricting my engine... Evil
Find all posts by this user
01-09-2014, 11:23 PM
Post: #68
Tutorial : Megasquirting an European (MAP) AE86 (4age)
pack Wrote:I have mine set up running with no problems.... But wanted to make sure the ignition timings are correct or am i using values that are restricting my engine... Evil

Unfortunately only a dyno will tell you that, there's no shortcut around it.
Save up, find a good deal and have it checked.

AE86 ex-daily
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  AFM to Map Conversion ps13michi 3 2,303 01-06-2022 10:34 AM
Last Post: ps13michi
  Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP mister86 12 9,532 02-10-2020 06:39 PM
Last Post: Power_uP
  European/UK vs Japanese Levin "Glass Grill" mad.matt 3 4,709 10-20-2017 02:47 PM
Last Post: mad.matt
  extracted freedom ecu 16v ignition map ditn 7 8,054 08-22-2016 10:01 AM
Last Post: ditn
  smallport question AFM or MAP? fax0815 5 7,553 05-17-2014 05:07 AM
Last Post: jondee86

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication