|
TPS and stop screw set up
|
|
04-23-2017, 01:22 PM
Post: #7
|
|||
|
|||
|
RE: TPS and stop screw set up
What Jondee is referencing to is the waxstat under the throttle body, that has the two small water line hoses connected too. You can remove, and try cleaning the waxstat with carb cleaner. If you go that far, I would remove the complete TB and clean everything. The problem could also be an air-lock in the cooling system if the coolant has been drained. If you do adjust the waxstat, it does not take a lot to reduce the RPM. I my case .5mm adjustment reduce the RPM by about 400 to 500 RPM while cold. Dave W
|
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
TPS and stop screw set up - kazi - 04-22-2017, 09:30 PM
RE: TPS and stop screw set up - Bean - 04-22-2017, 10:38 PM
RE: TPS and stop screw set up - banpei - 04-22-2017, 10:44 PM
RE: TPS and stop screw set up - jondee86 - 04-22-2017, 10:52 PM
RE: TPS and stop screw set up - kazi - 04-23-2017, 12:28 PM
RE: TPS and stop screw set up - jondee86 - 04-23-2017, 01:15 PM
RE: TPS and stop screw set up - Dave W - 04-23-2017 01:22 PM
RE: TPS and stop screw set up - kazi - 04-23-2017, 09:40 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Video : Adjust the TPS (Throttle Pos Sensor) on the 4A-GE | Homem Bomba | 3 | 11,947 |
10-25-2013 05:13 PM Last Post: Apsogos |
|
| TPS for carbs | totta Crolla | 7 | 8,355 |
01-30-2013 09:14 PM Last Post: totta Crolla |
|
| tps codes | totta Crolla | 1 | 4,307 |
08-01-2010 03:05 PM Last Post: totta Crolla |
|
| TPS 89452-12090 | gjuro | 2 | 5,581 |
05-12-2010 12:41 AM Last Post: isac |
|
| 16v to 20v throttle body's TPS | lolali | 4 | 10,158 |
10-21-2009 01:04 PM Last Post: isac |
|
User(s) browsing this thread: 1 Guest(s)