Fitting the RCA's

[Mux213]

Hey Jesse,

When you lower your car 40 mm this means the wishbone sits 40 mm 'higher' then with a stock setup. When you add our 30mm RCAs the wishbone will only differ 10 mm from stock. That can never be worse then the 40mm difference.

I think that fensport means that you should not use the RCAs with fully stock struts or when you lower the car less then the height of the RCAs because now your wishbone will end up 'lower' then stock. A few mm lower wont make much difference but 30mm lower my guess would be that it upsets the geometry alot.