Sorry for showing off LOL
09-17-2010, 03:16 PM
Post: #16
 
Will be interesting to see how these fit inside the inner arches of the 86. The shock mounting points are already placed pretty far outboard. Not much scope for narrowing the axle outside of em without reducing shock motion ratio's. If all else fails you can still slap on some arches and look awesome, but maybe a good thing to check before shortening the axle.

Can you take a pic of the clearance between these badboys and the shock/spring? I'm planning to run 15x9 rears too, but want them to be as far inboard as possible...go figure Big Grin

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user


Messages In This Thread
Sorry for showing off LOL - stalker - 09-01-2010, 03:35 AM
[] - cavey - 09-01-2010, 06:31 AM
[] - stalker - 09-01-2010, 07:02 AM
[] - nmwisima - 09-01-2010, 09:56 AM
[] - stalker - 09-16-2010, 03:48 AM
[] - stalker - 09-16-2010, 03:49 AM
[] - nmwisima - 09-16-2010, 09:44 AM
[] - Spitfire - 09-16-2010, 11:01 AM
[] - stalker - 09-16-2010, 02:07 PM
[] - nmwisima - 09-17-2010, 10:03 AM
[] - stalker - 09-17-2010, 10:14 AM
[] - Kid Karola - 09-17-2010, 01:20 PM
[] - stalker - 09-17-2010, 02:25 PM
[] - cavey - 09-17-2010, 02:42 PM
[] - The Doctor - 09-17-2010, 03:07 PM
[] - NoHachi - 09-17-2010 03:16 PM
[] - stalker - 09-17-2010, 03:27 PM
[] - DJexor - 09-17-2010, 04:55 PM
[] - The Doctor - 09-17-2010, 05:09 PM
[] - einneb - 09-17-2010, 05:18 PM
[] - stalker - 09-17-2010, 11:19 PM
[] - Miguel - Newera - 09-18-2010, 03:18 AM
[] - stalker - 09-18-2010, 05:18 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  A wee bit off Subject - Wiring diagram for AE7x/TE7x? oldeskewltoy 4 5,143 11-08-2008 08:50 PM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication