BT head with ST block.

[CHOPKIN2]

(01-28-2018 07:47 AM)Project D Wrote:  1) both oil pump will work. 13521-16060 sprocket for the BT pump; 13521-16010 for the ST (and any other 4AG)

2) Yes you can use your water pump (BT & ST share the same water pump pulley 16371-16030)

3) ST belt with ST oil pump (13568-19035), BT belt with BT oil pump (13568-19185)

4) Every 4AG(Z)E (16 or 20v) from 1987 to 2000 use the same crankshaft (13401-16020)

By the way, if you are swapping all you internal parts, you don't need a 20V block, you could take ANY 4AGE block.
Depending on where you live, it could make your life a lot easier.

I can also use the silvertop connecting rods with the BT pistons? I believe they are stronger.