Mikzu's 4A-GZE project

[Mikzu IV]

Little update,
I received some parts that were missing, but from a 7mgte supra
-Igniter 89620-14440
-two resistor packs one for fuel pump and one for injectors

I thought that the supra igniter should work in gze just by re-pinning the igniter's connectors, to mach the gze igniter's connectors wire colors
and leave the green and beige not connected


left gze igniter connector, center the 7m repinned, right repinned gze

next step is to wire-up the injectors resister pack
does anyone have an idea?
the wires on my pack are 3x brown and 1x white
the wires on my gze harness are 1x black and 2x black/orange

It might also be that all this doesn't work