COROLLA EE80 (AE82-AE92 parts) 4AGE TVIS 124HP

[tolisspi]

Hi everyone,

My 16V bigport has died a sudden death....Problems on the bottom end, rods and the big end bearings. The engine starts normally but there is a strange sound over 2000 revs.
I've decided its not worth fixing the bottom enf of the bigport but i decided to rebuilt a 4agze (i have one in the storehouse) to a 4age with new pistons (high compression) and headgasket.
The project includes:
- TODA pistons bore 82 and pin 20
- TODA cams 272 and 10,3 lift
- TODA valve spings (maybe i ll need a shims kit of TODA)
- I dont know yet about the gasket head TRD or TOYOTA
- Piggyback ecu (i know that ill be better a standalone but very expensive, maybe later)
- And when i ll have a standalone i ll rebuilt the induction with a throttlebody of blacktop 20v
This moment the bottom end of 4ag(z)e is ready and i have to rebuilt the head.
Some pics

And some pics exterior update
I had these doors. The one was broken and the headlghts were like these.


And now.... but i need the upper doors

Also i replaced the SPARCO Harness Pads with MOMO one. They are better.
I replaced the gearknob with MOMO.