timing tuning problem

[filh]

Hello,
[u:1288e23746]To Jondee[/u:1288e23746] , you are taking some fear from me!!!!
As you said and proof with the PDF table , it 's possible to have 44° at 5500rpm, and WOT , but with a static test .
That would explain why I had a good timing advance at idle .
And if the car is run on a Dyno Bench , is it considered as on load at Wot?

To FOBman : I'm not planning to run with much advance , it's just that when my machinist and I , had a look at timing value , engine running at 5500rpm, it was 44° , but whitout any load .
Now , with Jondee explanations, that looks more clear to me .
Thanks again for your help
Phil