Ivan's coupe: bodywork is done

[Ivan141]

I bought the senseo can at a store called Xenos, they sell a lot if this kind of stuff. The one I used is really perfect since the cap is also made of metal and is insanely difficult to get loose from the can. I wouldnt want to use one for the actual coffee to be honest. I'll be looking for tubing to complete the setup this evening. The nipples I used are a tad small, so I'll need to use a hose that will fit around both the 6mm nipples on the catch can and the 8mm of the PCV nipple of the engine.

@Robokill: Springs are perfect, I'm sticking with them until I find the cash for coilovers. Compared them with mux's new springs, the rate is somewherebetween 6 and 7 kg/mm since his car feels about the same.