Forged conrods

[alimonos]

oldeskewltoy Wrote:Eagle does NOT make rods for the 4AG... Carrillo does(over 800 Euros) Stock early rods can absorb 160-180PS.

(the following are approximate values)
Mid series 4AG rods (87-89) are the stoutest of all and can easily absorb 300-400+PS. Later series rods(90-95) are not quite as stout as the 87-89 rods, but they are very strong too... say about 300-325 PS Finally blktop rods are lighter then 90-95 rods and can absorb about 200-250PS.

The stronger the block, the more power the crank/rods can absorb. The block rigidity goes along way in keeping the crank and rods from over stressing which can cause micro fractures

do we have part number for them?
can we use them with the zenki crank?