MAPed Blue Top Swap, NOT staying running! Please Help?!
|
05-18-2008, 02:40 AM
Post: #49
|
|||
|
|||
Pressure drop....
There is a black plastic plug in the side of the manifold. The MAP should
be hooked up to one of the three outlets on that plug. All other ports on the manifold that don't have hoses hooked up to them should be blocked off. If you can get the motor to start and run, then you obviously have spark and fuel. But if you don't have any fuel being returned to the tank, then the chances are you don't have enough flow/pressure in the rail. The pump needs to be able to maintain better than 30 psi in the rail at idle, and around 40 psi at WOT, otherwise the injectors will be under-fueling. Maybe you need to get hold of a pressure gauge and get some actual measurements on what is happening at the rail ?? Cheers... jondee86 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
No idle below 2000 rpm rich running | Steller Engineering | 3 | 2,091 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
Red top in the ae86 | gh0st | 25 | 14,195 |
08-08-2022 08:43 PM Last Post: gh0st |
|
Running issues | sam3007 | 6 | 3,647 |
06-26-2022 01:34 PM Last Post: Dave W |
|
Replacing Top Windscreen Moulding | chrisae86 | 2 | 2,681 |
06-18-2022 08:56 PM Last Post: chrisae86 |
|
4age 16v running roughly - diagnostics shows unknown code | Ryo | 8 | 8,889 |
11-09-2020 10:51 AM Last Post: totta Crolla |
User(s) browsing this thread: 1 Guest(s)