MAPed Blue Top Swap, NOT staying running! Please Help?!

Threaded Mode | Linear Mode

MAPed Blue Top Swap, NOT staying running! Please Help?!

05-16-2008, 07:31 PM

Post: #42

Nanaki Offline

Junior Member

Posts: 32
Joined: Apr 2008
Reputation: 0

Wow thanks that is completly helpful! Thank you guys. I think my ECU part number is 89661-12051 If Im not mistaken. I googled it and it seems to be correct for the Japanese 'Maped' Blue top. It is also the same one listed on Club4ag in the Japanese 16v ecu pin outs section.

Jondee you wouldnt be interested in selling your damper and seal if I am unable to find one would you?

Also would laking that seal/ a working damper cause the FPR not to have the fuel pumped from the fuel rail? or would that mean I would still need a new FPR? I tryed the Japanese one and the one off my GTS motor and both do the same.

***Update*** May not need the Gasket, Might have found something that may work will update later.

« Next Oldest | Next Newest »

Messages In This Thread

MAPed Blue Top Swap, NOT staying running! Please Help?! - Nanaki - 05-07-2008, 04:27 AM

[] - Ivan141 - 05-07-2008, 06:37 AM

We have the technology :)) - jondee86 - 05-07-2008, 07:44 AM

[] - Nanaki - 05-08-2008, 09:15 AM

[] - jondee86 - 05-08-2008, 11:11 AM

[] - Nanaki - 05-08-2008, 08:12 PM

[] - Nanaki - 05-08-2008, 09:12 PM

[] - koh - 05-09-2008, 12:11 AM

[] - Ivan141 - 05-09-2008, 07:05 AM

Chasing ghosts.... - jondee86 - 05-09-2008, 11:05 AM

[] - Ivan141 - 05-09-2008, 06:30 PM

[] - F0Bman - 05-09-2008, 07:40 PM

[] - Nanaki - 05-09-2008, 09:50 PM

Do it once... get it right !!! - jondee86 - 05-10-2008, 12:00 AM

[] - Ivan141 - 05-10-2008, 12:14 AM

[] - Nanaki - 05-10-2008, 10:03 AM

Fuel + air + spark = ????? - jondee86 - 05-10-2008, 12:06 PM

Re: Fuel + air + spark = ????? - Nanaki - 05-10-2008, 09:45 PM

No fuel... no go.... - jondee86 - 05-11-2008, 12:17 AM

[] - Nanaki - 05-11-2008, 01:49 AM

Filing teeth :) - jondee86 - 05-11-2008, 02:57 AM

[] - Nanaki - 05-13-2008, 03:28 AM

[] - Ivan141 - 05-13-2008, 03:09 PM

[] - Nanaki - 05-13-2008, 06:03 PM

[] - Ivan141 - 05-13-2008, 07:22 PM

The elimination process.... - jondee86 - 05-14-2008, 08:34 AM

[] - Nanaki - 05-14-2008, 08:37 PM

[] - Ivan141 - 05-14-2008, 08:44 PM

[] - Nanaki - 05-14-2008, 11:14 PM

[] - Ivan141 - 05-15-2008, 06:14 AM

[] - Nanaki - 05-15-2008, 05:58 PM

[] - Ivan141 - 05-15-2008, 06:45 PM

[] - Nanaki - 05-15-2008, 06:54 PM

[] - Ivan141 - 05-15-2008, 10:45 PM

[] - Nanaki - 05-15-2008, 11:09 PM

[] - parrot - 05-16-2008, 04:15 AM

[] - Nanaki - 05-16-2008, 05:06 AM

[] - parrot - 05-16-2008, 05:21 AM

[] - Nanaki - 05-16-2008, 05:34 AM

Curiosities !!!! - jondee86 - 05-16-2008, 09:56 AM

[] - parrot - 05-16-2008, 12:49 PM

[] - Nanaki - 05-16-2008 07:31 PM

Getting things clear.... - jondee86 - 05-16-2008, 11:42 PM

[] - parrot - 05-17-2008, 12:20 AM

Not the only one then.... !!!! - jondee86 - 05-17-2008, 12:40 AM

[] - Nanaki - 05-17-2008, 07:41 PM

How much is enough ? - jondee86 - 05-18-2008, 12:14 AM

Re: How much is enough ? - Nanaki - 05-18-2008, 12:45 AM

Pressure drop.... - jondee86 - 05-18-2008, 02:40 AM

Re: Pressure drop.... - Nanaki - 05-18-2008, 08:51 AM

Just for the hell of it :) - jondee86 - 05-18-2008, 10:54 AM

[] - Nanaki - 05-18-2008, 09:42 PM

[] - Ivan141 - 05-18-2008, 10:21 PM

[] - Nanaki - 05-18-2008, 11:25 PM

[] - Allexz - 05-18-2008, 11:45 PM

How much is enough ?? - jondee86 - 05-19-2008, 10:28 AM

[] - Ivan141 - 05-19-2008, 08:00 PM

[] - Nanaki - 05-19-2008, 09:48 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	No idle below 2000 rpm rich running	Steller Engineering	3	2,739	11-30-2022 02:45 PM Last Post: RolanTHUNDER
	Red top in the ae86	gh0st	25	16,826	08-08-2022 08:43 PM Last Post: gh0st
	Running issues	sam3007	6	4,409	06-26-2022 01:34 PM Last Post: Dave W
	Replacing Top Windscreen Moulding	chrisae86	2	3,216	06-18-2022 08:56 PM Last Post: chrisae86
	4age 16v running roughly - diagnostics shows unknown code	Ryo	8	10,023	11-09-2020 10:51 AM Last Post: totta Crolla

User(s) browsing this thread: 1 Guest(s)