|
MAPed Blue Top Swap, NOT staying running! Please Help?!
|
|
05-16-2008, 05:06 AM
Post: #37
|
|||
|
|||
|
Makes since now that I look at the loom and see no plug for the resistor pack.. I figured if it needed it it would have a plug for it.
I started and idled the engine ( no resistor pack wired up. Just jumping the yellow to the power at 'on' let it idle for a minute or so and shut it off. I then unbolted and pulled off the FPR and there was fuel behind it. it just doesnt seem to be going thru it for some reason still. The car is still bogging down even though the TPS was replaced. It did help alittle or so it seems but still bogging. |
|||
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| No idle below 2000 rpm rich running | Steller Engineering | 3 | 2,742 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
| Red top in the ae86 | gh0st | 25 | 16,851 |
08-08-2022 08:43 PM Last Post: gh0st |
|
| Running issues | sam3007 | 6 | 4,415 |
06-26-2022 01:34 PM Last Post: Dave W |
|
| Replacing Top Windscreen Moulding | chrisae86 | 2 | 3,219 |
06-18-2022 08:56 PM Last Post: chrisae86 |
|
| 4age 16v running roughly - diagnostics shows unknown code | Ryo | 8 | 10,029 |
11-09-2020 10:51 AM Last Post: totta Crolla |
|
User(s) browsing this thread: 1 Guest(s)



