Mocal oil cooler & sandwitch plate ordered

[Gtsi-R]

that I understand,

Andwhat kind of thread have you used? and the thickness of the hoses etc...


and where is the oil cooler of you positioned ?
couse I think that I will place the oil cooler in front of the normal radiator,
but take in account that I wil place a FMIC in the near future..

with other words.. how mutch hose will I need? I dont think that I will Use a relocator for my filter, so will bolt the relocator directly th the engine..

for as I can see, that should be possible. will take an other close look.

These are the parts that I got in mind sofar..

MOCAL pressed plate oil to air coolers ( I think that a normal one will do just fine no needs for a HD pressed plate coolers)
OC5193-8
COOLER 19ROW 230MM 1/2BSP MALE
£91,12 (Excluding VAT at 17.5%)

Oil Cooler Take Offs
OTSP1
For spin-on 3/4UNF filter- tapped1/2BSP with built in oilstat
£38.72 (Excluding VAT at 17.5%)


Female 45o fitting

2x for on the sandwitch plate

HEFP43-8
1/2BSP for 1/2 hose- Moquip steel
£5.25 (Excluding VAT at 17.5%)

2x for the sandwitch plate

MMS3-8-8
1/2BSP x 1/2BSP- steel
£0.96 (Excluding VAT at 17.5%)


Female 90o fitting
2x for on the cooler

HEFP93-8
1/2BSP for 1/2 hose- Moquip steel
£5.25 (Excluding VAT at 17.5%)

FC332 "Socketless" Hose

4 meter (need about 1,7 meter from oil filter to the front x2 )

FBN0800
1/2" bore, 0.75" od - black- per metre
£7.51 (Excluding VAT at 17.5%)






this in adition if the hoses are delivered in 4 x 1 m ...


Male straight fitting- non swivel
2 x for the hose long length needed.

HEMP3-8
1/2BSP for 1/2 hose- Moquip steel
£1.70 (Excluding VAT at 17.5%)

Female straight fitting
2x for the hose long lengt neeeded

HEFP3-8
1/2BSP for 1/2 hose- Moquip steel
£1.70 (Excluding VAT at 17.5%)

do I miss annything ??