MAPed Blue Top Swap, NOT staying running! Please Help?!

Threaded Mode | Linear Mode

MAPed Blue Top Swap, NOT staying running! Please Help?!

05-10-2008, 12:14 AM

Post: #15

Ivan141 Offline

Super Moderator

Posts: 6,393
Joined: Sep 2004
Reputation: 0

Ah, very good point about those resistors ending up parallel. That's something you shouldnt mess up, ECU's built for high-Z injectors dont live long if you use them with low impedance injectors.

May I ask how the car idles when it is started? If it runs like crap, then something is likely to be very wrong. If it idles smoothly, but dies when revving, then it might be a smaller problem altogether.
Also, put your nose next to the exhaust next time you get it idling.. if it smells pig-rich, you can assume it's not the pump that's causing you problems (unless the circuit opening relay is not working properly that is, but you can rule this out by just jumping a permanent 12v source to the pump).

FABRICA MI DIEM, PVNC!

« Next Oldest | Next Newest »

Messages In This Thread

MAPed Blue Top Swap, NOT staying running! Please Help?! - Nanaki - 05-07-2008, 04:27 AM

[] - Ivan141 - 05-07-2008, 06:37 AM

We have the technology :)) - jondee86 - 05-07-2008, 07:44 AM

[] - Nanaki - 05-08-2008, 09:15 AM

[] - jondee86 - 05-08-2008, 11:11 AM

[] - Nanaki - 05-08-2008, 08:12 PM

[] - Nanaki - 05-08-2008, 09:12 PM

[] - koh - 05-09-2008, 12:11 AM

[] - Ivan141 - 05-09-2008, 07:05 AM

Chasing ghosts.... - jondee86 - 05-09-2008, 11:05 AM

[] - Ivan141 - 05-09-2008, 06:30 PM

[] - F0Bman - 05-09-2008, 07:40 PM

[] - Nanaki - 05-09-2008, 09:50 PM

Do it once... get it right !!! - jondee86 - 05-10-2008, 12:00 AM

[] - Ivan141 - 05-10-2008 12:14 AM

[] - Nanaki - 05-10-2008, 10:03 AM

Fuel + air + spark = ????? - jondee86 - 05-10-2008, 12:06 PM

Re: Fuel + air + spark = ????? - Nanaki - 05-10-2008, 09:45 PM

No fuel... no go.... - jondee86 - 05-11-2008, 12:17 AM

[] - Nanaki - 05-11-2008, 01:49 AM

Filing teeth :) - jondee86 - 05-11-2008, 02:57 AM

[] - Nanaki - 05-13-2008, 03:28 AM

[] - Ivan141 - 05-13-2008, 03:09 PM

[] - Nanaki - 05-13-2008, 06:03 PM

[] - Ivan141 - 05-13-2008, 07:22 PM

The elimination process.... - jondee86 - 05-14-2008, 08:34 AM

[] - Nanaki - 05-14-2008, 08:37 PM

[] - Ivan141 - 05-14-2008, 08:44 PM

[] - Nanaki - 05-14-2008, 11:14 PM

[] - Ivan141 - 05-15-2008, 06:14 AM

[] - Nanaki - 05-15-2008, 05:58 PM

[] - Ivan141 - 05-15-2008, 06:45 PM

[] - Nanaki - 05-15-2008, 06:54 PM

[] - Ivan141 - 05-15-2008, 10:45 PM

[] - Nanaki - 05-15-2008, 11:09 PM

[] - parrot - 05-16-2008, 04:15 AM

[] - Nanaki - 05-16-2008, 05:06 AM

[] - parrot - 05-16-2008, 05:21 AM

[] - Nanaki - 05-16-2008, 05:34 AM

Curiosities !!!! - jondee86 - 05-16-2008, 09:56 AM

[] - parrot - 05-16-2008, 12:49 PM

[] - Nanaki - 05-16-2008, 07:31 PM

Getting things clear.... - jondee86 - 05-16-2008, 11:42 PM

[] - parrot - 05-17-2008, 12:20 AM

Not the only one then.... !!!! - jondee86 - 05-17-2008, 12:40 AM

[] - Nanaki - 05-17-2008, 07:41 PM

How much is enough ? - jondee86 - 05-18-2008, 12:14 AM

Re: How much is enough ? - Nanaki - 05-18-2008, 12:45 AM

Pressure drop.... - jondee86 - 05-18-2008, 02:40 AM

Re: Pressure drop.... - Nanaki - 05-18-2008, 08:51 AM

Just for the hell of it :) - jondee86 - 05-18-2008, 10:54 AM

[] - Nanaki - 05-18-2008, 09:42 PM

[] - Ivan141 - 05-18-2008, 10:21 PM

[] - Nanaki - 05-18-2008, 11:25 PM

[] - Allexz - 05-18-2008, 11:45 PM

How much is enough ?? - jondee86 - 05-19-2008, 10:28 AM

[] - Ivan141 - 05-19-2008, 08:00 PM

[] - Nanaki - 05-19-2008, 09:48 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	No idle below 2000 rpm rich running	Steller Engineering	3	2,785	11-30-2022 02:45 PM Last Post: RolanTHUNDER
	Red top in the ae86	gh0st	25	16,966	08-08-2022 08:43 PM Last Post: gh0st
	Running issues	sam3007	6	4,471	06-26-2022 01:34 PM Last Post: Dave W
	Replacing Top Windscreen Moulding	chrisae86	2	3,252	06-18-2022 08:56 PM Last Post: chrisae86
	4age 16v running roughly - diagnostics shows unknown code	Ryo	8	10,071	11-09-2020 10:51 AM Last Post: totta Crolla

User(s) browsing this thread: 1 Guest(s)