|
MAPed Blue Top Swap, NOT staying running! Please Help?!
|
|
05-08-2008, 08:12 PM
Post: #6
|
|||
|
|||
|
Now.. from what I can tell I have the 2 ohm injectors. I have the Injector Resistor from the USDM car.. and after looking at the Resistor and the plug on the USDM engine harness I think that if I tap the blue and red wires together and then connect them both to the yellow on the Japanese harness.. Then the black with orange ( Might have been black with yellow. ) to the black with orange to get 12v with the key at the on position. It should in turn work or am I wrong?
Also Im going from what I jondee86 said in another of my posts of what the Injector Resistor looks like. |
|||
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| No idle below 2000 rpm rich running | Steller Engineering | 3 | 3,063 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
| Red top in the ae86 | gh0st | 25 | 18,356 |
08-08-2022 08:43 PM Last Post: gh0st |
|
| Running issues | sam3007 | 6 | 4,909 |
06-26-2022 01:34 PM Last Post: Dave W |
|
| Replacing Top Windscreen Moulding | chrisae86 | 2 | 3,507 |
06-18-2022 08:56 PM Last Post: chrisae86 |
|
| 4age 16v running roughly - diagnostics shows unknown code | Ryo | 8 | 10,639 |
11-09-2020 10:51 AM Last Post: totta Crolla |
|
User(s) browsing this thread: 1 Guest(s)



