Vacuum Sensor/line hook up help.

[Nanaki]

Okay I thought I had it right but.. If I didnt mention Before I am Running both Pwr Steering and A/C both of which have came off a GTS But seem to fit fine. BUT my problem is now. I have confused my self as to how to hook up the vac lines for the Pwr steering and the AC I also have a pic I will attach of three sensors? Do they need to go on? And I think the one to the far right is the A/C Idle up sensor? The other two im not sure about..


Also can anyone help me buy telling or even showing me with a pic on how to hook it all up?.. Its racking my brain..

Also upon hooking up some of the harness I found a plug that I have no idea what it is I will attach a picture of that below. It seems to tie in just under the fuse box but I cant find any plug on the Japanese engine harness that will lug into it. Also nothing on my old harness??


Now Last But not least. ( I hope ) I also see that just after a black square plug with one wire in it ( Black with Red Stripe ) has been cut... Where does it go? Its around the Igniter part of the harness..


PS. Does anyone know where the Wire/s for the A/C would be on the Japanese Harness? I think that Im going to have to splice in the US plug onto it to beable to use the US GTS A/C Pump...

THANK YOU ALL FOR YOUR HELP!!