|
Cam timing help
|
|
12-31-2007, 08:17 AM
Post: #2
|
|||
|
|||
|
I wanna know how this turns out :))
YES
 Or when you are at 100 degrees, adjust the camshaft to obtain maximum lift (the result is the same). Keep in mind that the camshaft will have several degrees of "dwell" at maximum lift (the camshaft will rotate with no change in lift). Try and put the lobe in the centre of this no more lift angle of rotation. There is a more accurate method of setting the cam separation, which involves finding the point of 0.050" opening on each flank, and dividing by two to obtain the centreline. But if you are planning to play around with lobe separation, your method will be fine Cheers... jondee86 The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore, all progress depends on the unreasonable man. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Cam timing help - toyota85ae86 - 12-29-2007, 06:28 AM
I wanna know how this turns out :)) - jondee86 - 12-31-2007 08:17 AM
Lobe separation on OEM cams ?? - jondee86 - 01-03-2008, 10:08 AM
Cam lobe separation... - jondee86 - 01-04-2008, 10:42 PM
[] - oldeskewltoy - 05-23-2009, 06:25 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 20v Silvertop stock ignition timing and fueling maps | Lykowsky | 5 | 16,318 |
07-18-2019 03:52 PM Last Post: oldeskewltoy |
|
| Cam Cap Bolt Snapped!! | Alex170984 | 1 | 4,739 |
06-08-2018 01:17 PM Last Post: Ivan141 |
|
| HKS 260 8.0 Cam Card | d3nso | 5 | 8,506 |
02-14-2018 08:29 PM Last Post: oldeskewltoy |
|
| 4agze timing | leon205gti | 11 | 16,268 |
04-07-2017 03:10 AM Last Post: jondee86 |
|
| Toda timing info - with good general 4AG timing info too | oldeskewltoy | 0 | 6,428 |
11-05-2016 01:34 AM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 1 Guest(s)