|
Idle speed problem
|
|
10-24-2007, 02:43 AM
Post: #4
|
|||
|
|||
|
High idle equals air leaking in....
The idle speed adjustment screw is under a rubber plug on the top
of the throttle body. Before adjusting this screw (to control the amount of air bypassing the throttle butterfly) you should check :- 1. The throttle butterfly is closing fully (push it closed with your finger while the engine is running) 2. There are no vacuum leaks in the intake manifold gaskets 3. There are no unplugged hoses to any of the tubes on the throttle body (P/S idle-up, A/C idle-up etc) 4. There are no open holes into the intake manifold from missing sensors Cheers... jondee86 The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore, all progress depends on the unreasonable man. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Idle speed problem - Kas - 10-21-2007, 10:29 PM
Less air equals lower idle speed.... - jondee86 - 10-23-2007, 10:00 AM
High idle equals air leaking in.... - jondee86 - 10-24-2007 02:43 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| No idle below 2000 rpm rich running | Steller Engineering | 3 | 3,482 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
| Engine starts/revs but no idle | GenkiMotors | 17 | 13,421 |
11-20-2021 04:12 AM Last Post: GenkiMotors |
|
| exhaust odor/idle MOT issue | Ryo | 7 | 10,723 |
07-15-2019 09:17 AM Last Post: jondee86 |
|
| 20v silvertop idle issue | AlexFourTwenty | 3 | 7,097 |
12-24-2017 03:27 AM Last Post: AlexFourTwenty |
|
| Silver top low idle | AlexFourTwenty | 7 | 13,525 |
10-16-2017 10:22 PM Last Post: AlexFourTwenty |
|
User(s) browsing this thread: 2 Guest(s)