|
Oil Coolers
|
|
08-12-2007, 12:44 AM
Post: #18
|
|||
|
|||
|
Okay,
but without the factory plate, the pipe with the winding which is screwed in the block, doesn´t fit to fix the sandwichplate. It´s too long and I don´t find a way to fix it, except of cutting the pipe and making another winding, which is a problem.. Can I maybe use the pipe of a model without factory cooler? raki P.S.: So there are definately 2 relief valves? one in the pump in one in the factory bypass? http://www.sg-rallyesport.de |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Oil Coolers - Simon Goes Sideways - 11-24-2004, 02:38 AM
[] - Jan Pedersen - 11-24-2004, 10:12 AM
[] - Simon Goes Sideways - 11-24-2004, 05:02 PM
[] - Simon Goes Sideways - 11-24-2004, 07:39 PM
[] - Simon Goes Sideways - 11-24-2004, 07:42 PM
[] - jamiemirror - 01-05-2005, 02:58 PM
[] - jamiemirror - 08-11-2007, 10:01 AM
Keeping cool.... - jondee86 - 08-11-2007, 11:09 AM
[] - raki - 08-12-2007 12:44 AM
[] - Rasteirinho - 09-04-2007, 08:43 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| trans oil, lsd oil change | Apolan | 9 | 20,086 |
10-01-2014 03:57 PM Last Post: mad.matt |
|
| Oil cooler -> low oil pressure | Jan Pedersen | 24 | 36,123 |
06-06-2013 07:36 PM Last Post: Deuce Cam |
|
| 4AGE crankcase gas and oil pressure too high, sprinking oil | demogun | 5 | 9,565 |
10-01-2011 09:47 AM Last Post: demogun |
|
| Oil Presure and what oil i have to use? | CHACAMAN | 4 | 6,762 |
08-27-2008 05:35 AM Last Post: F0Bman |
|
| High engine oil temps - oil cooler discussion | SutteR | 28 | 28,875 |
06-08-2008 11:23 PM Last Post: eight-six |
|
User(s) browsing this thread: 1 Guest(s)