Oil Coolers
|
08-11-2007, 01:48 PM
Post: #16
|
|||
|
|||
I'm about to install a mocal thermostatic remote filter setup I got from Think Automotive. They were very good and extremely helpful. You can get some fancy rubber type aeroquip hose from them which does not need swaging and enables simple fitment at home.
The real cost comes with the various threaded fittings you require on top of the cost of the cooler and assorted adaptor plates. I am fitting a straight out adaptor on the block with a remote filter mount installed just behind and low down to the battery tray with a home made alloy bracket to locate it. This remote filter mount then has a thermostatic plate attached to it. Then out to the setrab cooler. Think automotive's website is extremely informative. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Oil Coolers - Simon Goes Sideways - 11-24-2004, 02:38 AM
[] - Jan Pedersen - 11-24-2004, 10:12 AM
[] - Simon Goes Sideways - 11-24-2004, 05:02 PM
[] - Simon Goes Sideways - 11-24-2004, 07:39 PM
[] - Simon Goes Sideways - 11-24-2004, 07:42 PM
[] - jamiemirror - 01-05-2005, 02:58 PM
[] - jamiemirror - 08-11-2007, 10:01 AM
Keeping cool.... - jondee86 - 08-11-2007, 11:09 AM
[] - parrot - 08-11-2007 01:48 PM
[] - Rasteirinho - 09-04-2007, 08:43 PM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
trans oil, lsd oil change | Apolan | 9 | 17,949 |
10-01-2014 03:57 PM Last Post: mad.matt |
|
Oil cooler -> low oil pressure | Jan Pedersen | 24 | 32,495 |
06-06-2013 07:36 PM Last Post: Deuce Cam |
|
4AGE crankcase gas and oil pressure too high, sprinking oil | demogun | 5 | 8,367 |
10-01-2011 09:47 AM Last Post: demogun |
|
Oil Presure and what oil i have to use? | CHACAMAN | 4 | 5,804 |
08-27-2008 05:35 AM Last Post: F0Bman |
|
High engine oil temps - oil cooler discussion | SutteR | 28 | 25,200 |
06-08-2008 11:23 PM Last Post: eight-six |
User(s) browsing this thread: 3 Guest(s)