The Truenos Transformation

[The Big Yin]

well i think something is missing from the picture below
anyone guess what it is







and here is some of what is missing here this is the fubared one



clutch and flywheel removed as that is what i need off of that block
everything else is being replaced with new

212mm flywheel and a helix paddle clutch



so waiting on gasket set an AE101 oil pump to arrive ands then thats everything




Also think i have settled on what route i am going to go with my engine

going to stick with the 16v 4A-GE, but aiming for 200bhp

This will be acheived using mainly TODA components but with a few other manufacturers as well

the P.A.S.S racing lightweight underdrive pulley kit

http://store.autosportsupplies.com/merch...ry_Code=EP
illegal garage one peice lightweight prop

http://forums.club4ag.com/zerothread?id=5600
Lightweight Flywheel, possably toda but not sure yet

lighten and balance crank, flywheel

and the
AE86 high cam computer KIT.
(STAGE-III Type 200PS)

Price: $4500



Kit contents
(1)TODA forged piston set (ø81.00mm / ø81.25mm / ø82.00mm)
(2)High power camshaft IN 280 (10.3) x1 EX 288 (10.5) x1
(3)Adjustable cam pulleys x2
(4)Inner-shim KIT
(5)TODA Fuel computer.(Standard computer trade-in)
(6)Fuel MAP switch ( fuel control) with fuel regulator
(7)Sports injection KIT
Adjustable cam pulleys x2
Up rated valve springs set

Option : Ignition timing MAP switch (for Ignition timing control)



the TODA kit comes to about £2260

everything else is about £1500 including mapping

which should see in excess of 200bhp