|
4age 20v and 16v engine mounts the same?
|
|
05-10-2007, 11:59 PM
Post: #4
|
|||
|
|||
|
Well I have expereince for I've already installed a 20V block into my AE86 and the regular mounts will bolt up... BUT the cast iron AE86 transmission support brace on the driver side will NOT fit the 20V block! The block is cast ever so differently that the brace will snap when installation is attempted. The passenger cast iron brace fits... so you must decide if you want a driverside brace of not... and if you do, you will have to fabricate the support brace
Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
4age 20v and 16v engine mounts the same? - mailboxdinosour - 05-09-2007, 12:22 PM
[] - oldeskewltoy - 05-10-2007 11:59 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Question about 4AG 20v Engine Block | CHACAMAN | 1 | 2,003 |
06-10-2022 05:17 PM Last Post: oldeskewltoy |
|
| Cusco Powerball Headers on a NA 4AGE 16V? | JDMitch | 11 | 22,301 |
05-01-2021 10:09 PM Last Post: Ivan141 |
|
| 4AGE 16V engine overheat when at high speed | chenfon | 32 | 25,125 |
12-31-2020 06:39 AM Last Post: chenfon |
|
| 4age 16v running roughly - diagnostics shows unknown code | Ryo | 8 | 8,408 |
11-09-2020 10:51 AM Last Post: totta Crolla |
|
| AE86 4A-GE 16v engine harness rebuild | FanIsHere | 7 | 11,239 |
01-17-2020 08:04 PM Last Post: Project D |
|
User(s) browsing this thread: 1 Guest(s)