|
Power - 4AGE ITB's and Stand alone ECU?
|
|
03-19-2007, 03:03 PM
Post: #8
|
|||
|
|||
|
Hello
I had a standard engine with just an air filter, header and HKS exhaust. It made 116bhp with 148,000km on the clock. I have just had AE101 throttle bodies fitted with 272/7.9 TODA cams, 0.8mm head gasket and Apexi Power FC ECU. It makes 140bhp at 7,800rpm and the power was still climbing. Need to get some high strength con-rod bolts (and an engine balance, it doesn't half vibrate at that speed) to get some more revs so I can get more power. Both power figures are using regular petrol in Japan, that is 89 Octane. I hope this info helps |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Power - 4AGE ITB's and Stand alone ECU? - byd1380 - 03-14-2007, 12:27 AM
[] - Toyota T23 - 03-14-2007, 11:12 PM
[] - Toyota T23 - 03-17-2007, 05:41 PM
[] - Ian - AE86 - 03-17-2007, 07:17 PM
Rolling Road - byd1380 - 03-19-2007, 12:35 AM
[] - Ozone - 03-19-2007 03:03 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| idler pulley for 4AGE with power steering/aircon | ondafly | 4 | 409 |
07-06-2026 11:11 PM Last Post: ondafly |
|
| Ecu for AE86 4AGE | Steller Engineering | 6 | 8,552 |
03-10-2021 11:06 PM Last Post: Ivan141 |
|
| ITB convert need standalone ECU | izanagi | 2 | 8,540 |
04-07-2016 11:24 PM Last Post: izanagi |
|
| 4age 16v oem ecu rev limiter research | ditn | 18 | 34,850 |
06-22-2015 08:02 AM Last Post: ditn |
|
| 4age 16v 1st and 2nd generation cams and not only difference | Apsogos | 3 | 9,221 |
09-16-2013 08:24 AM Last Post: Apsogos |
|
User(s) browsing this thread: 1 Guest(s)