16V/20V pistons

Threaded Mode | Linear Mode

16V/20V pistons

02-22-2007, 01:48 AM

Post: #3

oldeskewltoy Offline

4AG Super Genius ;)

Posts: 1,829
Joined: Jan 2007
Reputation: 1

depends on what you mean by work.... they can be used... but if the timing belt breaks the engine is no longer non interference... Also the 20V pistons can develop hot spots because the valve reliefs are so close to the pistons edge, but in all but the most extreme conditions this isn't a significant point

Dan -

You can | Sad

.... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991

« Next Oldest | Next Newest »

Messages In This Thread

16V/20V pistons - woper - 02-21-2007, 11:27 PM

[] - Ivan141 - 02-21-2007, 11:29 PM

[] - oldeskewltoy - 02-22-2007 01:48 AM

[] - domi - 02-22-2007, 11:11 AM

[] - Mux213 - 02-22-2007, 11:23 AM

[] - domi - 02-22-2007, 12:05 PM

[] - oldeskewltoy - 02-22-2007, 06:08 PM

[] - woper - 02-22-2007, 08:22 PM

[] - Ivan141 - 02-22-2007, 08:44 PM

[] - woper - 02-23-2007, 01:37 AM

[] - robokill - 02-23-2007, 02:40 AM

[] - Ivan141 - 02-23-2007, 06:08 PM

[] - oldeskewltoy - 02-23-2007, 08:04 PM

[] - jamiemirror - 02-23-2007, 10:48 PM

[] - woper - 02-23-2007, 11:05 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	82mm Stock compression Pistons	apardal	4	3,301	11-24-2021 04:26 PM Last Post: apardal
	Small Port 10.3 Pistons	Alex170984	1	4,637	10-25-2016 09:18 PM Last Post: oldeskewltoy
	How to install 20V ITB on 16V head	Mr.komp	7	12,527	12-28-2015 05:35 PM Last Post: pack
	16V ECU pinout on 20v swap	pack	2	5,943	06-12-2015 01:22 AM Last Post: pack
	20v block with 16v head and internals possible?	ditn	3	7,503	08-12-2014 09:19 PM Last Post: ditn

User(s) browsing this thread: 3 Guest(s)