rim and tyre size?

Threaded Mode | Linear Mode

rim and tyre size?

02-08-2007, 07:23 PM

Post: #5

Apolan Offline

Posting Freak

Posts: 2,063
Joined: Nov 2004
Reputation: 0

ET 0 means the mounting hub is in the center of the width of the wheel, so if you have a 7 inch wheel (in width), 3.5 inches stick to the inside, and the other half outside hachi has them hubs pretty tucked in so lower values of ET are needet to fill those arches nicely. (bigger et means th wheels mounting hub is positioned further out, so more of the wheel sticks inside.

« Next Oldest | Next Newest »

Messages In This Thread

rim and tyre size? - Aaron - 02-08-2007, 03:19 PM

[] - Apolan - 02-08-2007, 03:26 PM

[] - Aaron - 02-08-2007, 03:29 PM

[] - Mux213 - 02-08-2007, 04:13 PM

[] - Apolan - 02-08-2007 07:23 PM

[] - dr.occa - 02-09-2007, 09:39 PM

[] - Denmark - 02-09-2007, 09:43 PM

[] - Apolan - 02-09-2007, 09:46 PM

[] - Denmark - 02-09-2007, 09:49 PM

[] - Knudsen - 02-09-2007, 10:04 PM

[] - dr.occa - 02-09-2007, 10:31 PM

[] - Knudsen - 02-09-2007, 10:58 PM

[] - dr.occa - 02-09-2007, 11:01 PM

[] - Apolan - 02-10-2007, 02:04 AM

[] - oldeskewltoy - 02-10-2007, 02:29 AM

[] - Apolan - 02-10-2007, 02:56 AM

[] - oldeskewltoy - 02-10-2007, 03:10 AM

[] - Apolan - 02-10-2007, 03:19 AM

[] - oldeskewltoy - 02-10-2007, 03:28 AM

[] - robokill - 02-10-2007, 03:30 AM

[] - Apolan - 02-10-2007, 03:41 AM

[] - dr.occa - 02-10-2007, 04:29 AM

[] - Denmark - 02-10-2007, 10:22 AM

[] - Knudsen - 02-10-2007, 01:02 PM

[] - Denmark - 02-10-2007, 02:13 PM

[] - peter møller - 02-11-2007, 04:38 AM

[] - Apolan - 02-11-2007, 01:05 PM

[] - SekiguchiUeno - 02-11-2007, 01:12 PM

[] - domi - 02-11-2007, 07:57 PM

[] - peter møller - 02-11-2007, 08:30 PM

[] - domi - 02-12-2007, 05:22 AM

[] - peter møller - 02-12-2007, 09:38 AM

[] - NoHachi - 02-12-2007, 03:46 PM

[] - Denmark - 02-12-2007, 10:25 PM

[] - oldeskewltoy - 02-12-2007, 11:04 PM

[] - peter møller - 02-13-2007, 05:55 AM

[] - Denmark - 02-16-2007, 10:34 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Tyre load index	Blaze0010	6	1,578	06-12-2025 04:59 PM Last Post: Blaze0010
	Shim size for AM cams	kazi	4	5,972	12-18-2017 05:34 PM Last Post: oldeskewltoy
	Hub size	kazi	5	10,711	06-09-2017 10:06 PM Last Post: kazi
	Rim width. Which is best....	Dino86	5	7,660	01-07-2017 03:09 PM Last Post: Dino86
	Camshaft sprocket bolt size?	harkes	1	5,207	07-03-2015 12:41 PM Last Post: Dave W

User(s) browsing this thread: 2 Guest(s)