|
Brake master cylinder
|
|
01-29-2007, 12:04 PM
Post: #5
|
|||
|
|||
|
There is a guy on US ebay who sells OEM master cylinders at USD$59 or buy it now USD$65. I got one and it arrived in Australia in about 5 days. It has had the 'toyota' on the casting ground off so it's factory and brand spanking new.
It has the two hole attachment to the booster and these are at 180 degrees, i.e. horizontal. The front brake line comes out at 90 degrees from the end i.e. straight upwards rather than directly outward toward the front of the car. Simple to make up this small section of line. The brake warning loom connector is different from JDM but easy to swap over. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Brake master cylinder - Abe - 01-29-2007, 12:06 AM
[] - parrot - 01-29-2007 12:04 PM
[] - cannabolic - 01-29-2007, 01:01 PM
[] - cannabolic - 01-29-2007, 07:43 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Bigger brake master cylinder options | Koen | 10 | 2,528 |
01-08-2026 03:12 PM Last Post: r.ave |
|
| 4AGE cylinder head plug removal | Ivan141 | 5 | 4,990 |
09-30-2023 09:47 PM Last Post: Ivan141 |
|
| Brake advice - master cylinder | mannix20vt | 12 | 19,087 |
08-21-2017 03:21 PM Last Post: Project D |
|
| Correct connection brake master cylinder? | bozu | 5 | 9,589 |
07-26-2015 12:28 PM Last Post: bozu |
|
| torque setting head cylinder bolts | izanagi | 1 | 6,580 |
05-29-2015 01:23 AM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 1 Guest(s)