4age bigport head: port & polish

Threaded Mode | Linear Mode

4age bigport head: port & polish

11-14-2006, 08:24 PM

Post: #42

Os7213 Offline

Junior Member

Posts: 46
Joined: Nov 2006
Reputation: 0

Thank a lot for all you advises everyones!

BenR im now on the porting of my blue-top head(Since i have a blue-top for tests and a red-top to run the setup). What im gonna do its a porting match for the mounth of the port and ill do nice ports from the valve seat to the valve guide and reshape the splitter. That gonna be my test and ill post up some pics of the work!

For the cams 272deg 9mm that i already have i think they could work pretty well with the red-top head ive chosse them for a nice and smooth powerband following the stock one but at higher rpms...And since i dont have money to spend on others cams ill keep them! But yeah the 280deg 9mm lift are very interessting. The idea of putting a 264deg cam was only to push the limit of the powerband to higher rpm but i really want to keep my middle power!

And for the cat pipe ill take you advise and put it on dyno to compare!

Thank
Ugo

« Next Oldest | Next Newest »

Messages In This Thread

4age bigport head: port & polish - cj - 10-16-2006, 12:04 PM

[] - cannabolic - 10-16-2006, 02:26 PM

[] - NoHachi - 10-16-2006, 02:30 PM

[] - adomz - 10-16-2006, 10:28 PM

[] - BenR - 10-18-2006, 07:36 PM

[] - alimonos - 10-18-2006, 07:48 PM

[] - BenR - 10-18-2006, 07:54 PM

[] - NoHachi - 10-18-2006, 08:09 PM

[] - jamiemirror - 10-18-2006, 08:28 PM

[] - BenR - 10-18-2006, 08:39 PM

[] - BenR - 10-18-2006, 08:40 PM

[] - jamiemirror - 10-18-2006, 09:17 PM

[] - BenR - 10-18-2006, 09:35 PM

[] - jamiemirror - 10-18-2006, 09:52 PM

[] - Corey - 10-18-2006, 10:52 PM

[] - BenR - 10-18-2006, 11:12 PM

[] - Corey - 10-18-2006, 11:18 PM

[] - Os7213 - 11-08-2006, 07:08 AM

[] - Os7213 - 11-09-2006, 05:47 AM

[] - jamiemirror - 11-09-2006, 10:12 AM

[] - Os7213 - 11-10-2006, 08:20 AM

[] - Os7213 - 11-10-2006, 08:53 AM

[] - jamiemirror - 11-10-2006, 09:48 AM

[] - Os7213 - 11-10-2006, 12:33 PM

[] - NoHachi - 11-10-2006, 12:48 PM

[] - jamiemirror - 11-10-2006, 12:52 PM

[] - Os7213 - 11-10-2006, 01:08 PM

[] - jamiemirror - 11-10-2006, 01:22 PM

[] - Os7213 - 11-10-2006, 01:25 PM

[] - jamiemirror - 11-10-2006, 03:43 PM

[] - firehawk - 11-10-2006, 09:57 PM

[] - Os7213 - 11-11-2006, 04:10 AM

[] - BenR - 11-12-2006, 04:03 AM

[] - Os7213 - 11-12-2006, 09:24 AM

[] - BenR - 11-12-2006, 09:58 PM

[] - Os7213 - 11-13-2006, 12:52 AM

[] - BenR - 11-14-2006, 03:52 AM

[] - Os7213 - 11-14-2006, 06:52 AM

[] - jamiemirror - 11-14-2006, 11:09 AM

[] - BenR - 11-14-2006, 02:36 PM

[] - BenR - 11-14-2006, 02:48 PM

[] - Os7213 - 11-14-2006 08:24 PM

[] - BenR - 11-14-2006, 11:00 PM

[] - Os7213 - 11-18-2006, 09:33 AM

[] - BenR - 11-20-2006, 03:13 AM

[] - Os7213 - 11-20-2006, 07:21 AM

[] - BenR - 11-20-2006, 04:52 PM

[] - Os7213 - 11-20-2006, 05:55 PM

[] - BenR - 11-20-2006, 11:27 PM

[] - Os7213 - 11-21-2006, 04:53 AM

[] - Corey - 12-03-2006, 01:31 AM

[] - apardal - 12-03-2006, 03:11 AM

[] - jamiemirror - 12-03-2006, 07:35 PM

[] - Corey - 12-04-2006, 09:23 PM

[] - BenR - 12-05-2006, 01:40 AM

[] - Os7213 - 12-06-2006, 06:46 AM

[] - eight-six - 01-20-2009, 03:33 PM

[] - oldeskewltoy - 01-21-2009, 06:05 PM

[] - totta Crolla - 01-21-2009, 11:49 PM

[] - oldeskewltoy - 01-22-2009, 12:14 AM

[] - ZDoman - 01-22-2009, 12:52 AM

[] - eight-six - 01-22-2009, 12:35 PM

[] - tolisspi - 01-22-2009, 01:15 PM

[] - totta Crolla - 01-22-2009, 06:59 PM

[] - oldeskewltoy - 01-24-2009, 06:32 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	4AGE cylinder head plug removal	Ivan141	5	2,975	09-30-2023 09:47 PM Last Post: Ivan141
	Early tvis red top from e9 gti small or bigport?	Ryo	3	8,198	04-20-2018 09:14 AM Last Post: Ivan141
	10.8:1, 264/256° Bigport	nyberrg	4	7,048	06-12-2017 09:57 AM Last Post: nyberrg
	Small Port Swap	Alex170984	1	4,601	11-21-2016 01:46 PM Last Post: Alex170984
	Small Port 10.3 Pistons	Alex170984	1	4,741	10-25-2016 09:18 PM Last Post: oldeskewltoy

User(s) browsing this thread: 1 Guest(s)