Os7213 Ae86 Project

[Os7213]

Hi guys im new in this forum and want to introduce myself
My name is Ugo im 22yd and im a Machinist.

Here my project:
(The car remain stock till next summer cause i want all parts ready and do only one complete installation )
Unfortunately its the first time o post here so its hard for to compile all the infos from my origin forum and post it here but some work as been done here and there.

NOTE: TO SEE IMAGE IN BIGGER SIZE JUST RIGHT-CLICK OPEN








Here the setup for now:

Suspension:
-Shocks Tokico HTS 102 40mm short stroke
-T3 Strut tube+spacers 21.5mm
-Ground control coilovers
-Eiback springs 8kg front 6kg rear
-T3 Top-hat system
-T3 Negative camber plates
-T3 Negative camber blocks
-T3 Tension rods
-Ueo style front lower arms
-T3 4link+panhard
-Ueo style tie-rods end
-TRD rack and pinion
-Tanabe sway bars
-Cusco front tower bar
-Cusco rear tower bar
-Cusco lower bar
-AMT tri-bar




Engine (Not yet complete):
- 4agze small-port head
-20v Itb's
-Toda camshaft 272˚ 9mm lift
-Toda camgear
-Toda spring kit
-Toda under-bucket shims kit
-Megasquirt


Brake:
-Project Mu type Ns brake pads front
-Project Mu D1 specs brake pads rear
-Braided lines
-Brembo slotted ,dip-drilled

Wheels:
SSR speedStar Mesh Ver.B

Here some pictures of under the car after some work and cleaning:











Interior after welding:





And finally some parts:
















(Up+Down)































So that it for now hope you enjoy!
Many more to come cause i begin the motor work in few weeks.

See ya.
Ugo