Wheels, dimensions, offset and so on
11-04-2006, 06:25 AM
Post: #13
 
Seems it's impossible to find any 14" rims in norway with an offsett lower than +35.

I tried a set with +35 offset and it's like 0.5 mm from the spring so I don't think those will be such a good idea.

So now I'm gonna order some 32 mm spacers from TechnoToyTuning, and that should clear things up Smile

Man it's no fun not being able drive my hachi now that the ground is covered with snow and ice.

I just hope it won't take too long to get the spacers shipped from the U.S.
Find all posts by this user


Messages In This Thread
[] - oldskull - 10-23-2006, 08:28 PM
[] - DJexor - 10-23-2006, 08:41 PM
[] - Holli - 10-24-2006, 08:45 AM
[] - Kodoku - 10-24-2006, 01:43 PM
[] - banpei - 10-24-2006, 05:32 PM
[] - amigaguy - 10-25-2006, 07:27 PM
[] - oldskull - 10-25-2006, 07:42 PM
[] - amigaguy - 10-26-2006, 04:02 AM
[] - SutteR - 10-26-2006, 08:53 AM
[] - amigaguy - 10-27-2006, 04:41 AM
[] - SutteR - 10-27-2006, 08:32 AM
[] - amigaguy - 11-04-2006 06:25 AM
[] - oldskull - 11-04-2006, 11:29 AM
[] - cannabolic - 11-04-2006, 12:15 PM
[] - jamiemirror - 11-06-2006, 11:47 AM
[] - amigaguy - 11-10-2006, 06:00 AM
[] - SutteR - 11-10-2006, 08:32 AM
[] - SutteR - 11-10-2006, 10:33 AM
[] - amigaguy - 11-10-2006, 04:47 PM
[] - NoHachi - 11-11-2006, 02:02 AM
[] - amigaguy - 11-11-2006, 05:32 PM
[] - amigaguy - 11-23-2006, 07:56 PM
[] - amigaguy - 11-29-2006, 03:15 AM
[] - SutteR - 11-29-2006, 08:38 AM
[] - amigaguy - 11-29-2006, 08:34 PM
[] - PazzaAE86 - 11-29-2006, 08:51 PM
[] - amigaguy - 11-29-2006, 11:46 PM
[] - Mux213 - 11-30-2006, 10:48 AM
[] - apardal - 11-30-2006, 11:03 AM
[] - dAYTONA - 12-01-2006, 01:56 AM
[] - amigaguy - 12-01-2006, 02:35 AM
[] - NoHachi - 12-01-2006, 11:34 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Quick question - Brake Pad Dimensions Lt86 2 6,549 06-07-2015 12:08 AM
Last Post: jondee86
  Dimensions clutch master cylinder bozu 2 7,536 04-16-2015 07:11 AM
Last Post: bozu
  Billet 5X114.3 hubs adds 30mm offset 4000GT 0 4,380 01-30-2015 06:40 AM
Last Post: 4000GT
  Spindle dimensions, backing plate bolt pattern Rascal21 18 26,666 03-13-2014 11:45 AM
Last Post: Rascal21
  DRAG dr54 wheels >> +15 offset >? help !! geoscranny84 4 7,114 04-26-2012 09:31 PM
Last Post: bozu

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication