Wheels, dimensions, offset and so on

Threaded Mode | Linear Mode

Wheels, dimensions, offset and so on

10-26-2006, 08:53 AM

Post: #10

SutteR Offline

Senior Member

Posts: 358
Joined: Mar 2005
Reputation: 0

The inner size what you are for is (I guess) 54mm. But no really problem if the rim has bigger hole in there.

I think that the ET27 will be a little more than you need. The stock GT rims are 14"x6" in my opinion and they are ET20 (or 21...).

If you have a lots of snow in the winter you better use 165 or 175 tires, 185 is too wide for the hachis weight on slippery roads.
175/60 is a bit small, 175/65R14 is the exchange of the stock size. I have 175/70 R13 though to have higher tire walls which is good for the snow (and 13" tires are cheaper too).

Where do you live btw? Cause you should check the junkyards for old Nissan, Mazda, Mitsubishi and Toyota rims, you might be able to find some with the needed parameters.

« Next Oldest | Next Newest »

Messages In This Thread

Wheels, dimensions, offset and so on - amigaguy - 10-23-2006, 07:54 PM

[] - oldskull - 10-23-2006, 08:28 PM

[] - DJexor - 10-23-2006, 08:41 PM

[] - Holli - 10-24-2006, 08:45 AM

[] - Kodoku - 10-24-2006, 01:43 PM

[] - banpei - 10-24-2006, 05:32 PM

[] - amigaguy - 10-25-2006, 07:27 PM

[] - oldskull - 10-25-2006, 07:42 PM

[] - amigaguy - 10-26-2006, 04:02 AM

[] - SutteR - 10-26-2006 08:53 AM

[] - amigaguy - 10-27-2006, 04:41 AM

[] - SutteR - 10-27-2006, 08:32 AM

[] - amigaguy - 11-04-2006, 06:25 AM

[] - oldskull - 11-04-2006, 11:29 AM

[] - cannabolic - 11-04-2006, 12:15 PM

[] - jamiemirror - 11-06-2006, 11:47 AM

[] - amigaguy - 11-10-2006, 06:00 AM

[] - SutteR - 11-10-2006, 08:32 AM

[] - SutteR - 11-10-2006, 10:33 AM

[] - amigaguy - 11-10-2006, 04:47 PM

[] - NoHachi - 11-11-2006, 02:02 AM

[] - amigaguy - 11-11-2006, 05:32 PM

[] - amigaguy - 11-23-2006, 07:56 PM

[] - amigaguy - 11-29-2006, 03:15 AM

[] - SutteR - 11-29-2006, 08:38 AM

[] - amigaguy - 11-29-2006, 08:34 PM

[] - PazzaAE86 - 11-29-2006, 08:51 PM

[] - amigaguy - 11-29-2006, 11:46 PM

[] - Mux213 - 11-30-2006, 10:48 AM

[] - apardal - 11-30-2006, 11:03 AM

[] - dAYTONA - 12-01-2006, 01:56 AM

[] - amigaguy - 12-01-2006, 02:35 AM

[] - NoHachi - 12-01-2006, 11:34 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Quick question - Brake Pad Dimensions	Lt86	2	6,549	06-07-2015 12:08 AM Last Post: jondee86
	Dimensions clutch master cylinder	bozu	2	7,528	04-16-2015 07:11 AM Last Post: bozu
	Billet 5X114.3 hubs adds 30mm offset	4000GT	0	4,379	01-30-2015 06:40 AM Last Post: 4000GT
	Spindle dimensions, backing plate bolt pattern	Rascal21	18	26,659	03-13-2014 11:45 AM Last Post: Rascal21
	DRAG dr54 wheels >> +15 offset >? help !!	geoscranny84	4	7,111	04-26-2012 09:31 PM Last Post: bozu

User(s) browsing this thread: 1 Guest(s)