Clutch Master Cylinder..how to remove?

[dAYTONA]

yes, it is possible...

I rebuilt mine a few days ago, and I was actually going to write a post that i wanted to sue TOYOTA for making it so difficult ;-)

To remove the the clutch master cylinder by making it slide between the stud and the the brake booster, you have to push the stud in a bit.

You can go inside the car, and put something like a big screwdriver inbetween the firewall and the clutch pedal assembly, which will bend it back a bit, pulling the stud inside a bit, which will give you enough room between the stud and the brake booster to pull out the clutch master cylinder....

On one of my hachis I have actually filed the stud down a little bit, which
makes changing the clutch master cylinder easy...