3rd member talk (ring&pinion setup etc.)

Threaded Mode | Linear Mode

3rd member talk (ring&pinion setup etc.)

07-25-2006, 01:14 PM

Post: #8

Mux213 Offline

Super Moderator

Posts: 7,048
Joined: Aug 2004
Reputation: 0

Ivan, wouldn't the extra oil be a problem? Better lube yes, but more fluid for the gears to run around it, that also causes more heat, I'm no expert in these, I have no idea how bad this is. I guess it works both way, a little more heat generated, but alot more oil to soak up the heat.

I don't think you should rule out the oil cooler idea though, aslong as the system stays leak free it's as safe as stock, worse thing that can happen is that the pump shuts down, and then you are basically back to stock.
then again, wouldn't mounting an oil cooler mean the whole diff gets filled with oil to the top? that might actualy be a good thing?

I like the oil temp sensor idea Big Grin

Greetz,

Bastiaan "mux213" Olij

Moved down under, no more hachi Sad

« Next Oldest | Next Newest »

Messages In This Thread

3rd member talk (ring&pinion setup etc.) - Ivan141 - 07-24-2006, 10:19 AM

[] - firehawk - 07-24-2006, 08:17 PM

[] - Kas - 07-24-2006, 11:11 PM

[] - SutteR - 07-25-2006, 06:34 AM

[] - Ivan141 - 07-25-2006, 08:26 AM

[] - gon - 07-25-2006, 11:26 AM

[] - Ivan141 - 07-25-2006, 12:44 PM

[] - Mux213 - 07-25-2006 01:14 PM

[] - NoHachi - 07-25-2006, 02:04 PM

[] - gon - 07-25-2006, 02:49 PM

[] - gon - 07-25-2006, 02:54 PM

[] - Ivan141 - 07-25-2006, 03:49 PM

[] - adomz - 07-25-2006, 04:31 PM

[] - NoHachi - 07-25-2006, 04:53 PM

[] - gon - 07-25-2006, 05:31 PM

[] - wouter86 - 07-25-2006, 08:59 PM

[] - NoHachi - 07-25-2006, 09:31 PM

[] - Ivan141 - 07-26-2006, 08:46 AM

[] - NoHachi - 07-26-2006, 08:58 AM

[] - firehawk - 07-26-2006, 11:05 AM

[] - gon - 07-26-2006, 11:24 AM

[] - Max_Misawa - 07-27-2006, 11:08 AM

[] - Ivan141 - 07-27-2006, 12:00 PM

[] - gon - 07-27-2006, 03:31 PM

[] - Max_Misawa - 07-27-2006, 11:22 PM

[] - Ivan141 - 07-28-2006, 08:15 AM

[] - Max_Misawa - 07-28-2006, 08:18 AM

Re: 3rd member talk (ring&pinion setup etc.) - kenny - 08-03-2006, 12:30 PM

[] - eight-six - 08-03-2006, 08:19 PM

[] - eight-six - 08-03-2006, 08:27 PM

[] - Ivan141 - 08-04-2006, 08:06 AM

[] - SYM - 08-04-2006, 09:24 AM

[] - eight-six - 08-04-2006, 09:30 PM

[] - Mux213 - 08-05-2006, 02:06 PM

[] - eight-six - 08-05-2006, 03:40 PM

[] - Mux213 - 08-05-2006, 04:45 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Lets talk engine mounts	kazi	6	8,659	08-31-2017 12:46 PM Last Post: parrot
	Shifting from 4th to 3rd	pack	7	7,165	04-27-2017 07:26 PM Last Post: totta Crolla
	ring gear bolts	DJexor	3	6,050	12-26-2016 10:56 PM Last Post: totta Crolla
	DIY: a quick outline on why & how to set pinion angle.	assassin10000	9	20,018	12-21-2016 10:28 PM Last Post: ditn
	T50 gearbox - TRD 2nd and 3rd gear	hachirokkos	3	7,305	11-27-2015 10:06 AM Last Post: Project D

User(s) browsing this thread: 1 Guest(s)