The parts i´ve gathered for winter

[rikard]

peter møller Wrote:I just ordered the T3 ITB adapter today from Gabriel at Technotoytuning.com He said it was just a matter of bolt and go! It is allready prepared for mounting of the original throttle cable, and all you need is to cut open the wiring harness and extend the cables for the throttle position sensor. All this is only possible with a MAP type engine, if you are running a MAF engine, you need to convert into MAP.
You do need a stand-alone engine management, and bigger injectors, either the 20V or the 4AGZE injectors. But the adapter plate should be pretty easy installed.

http://www.technotoytuning.com/media/t3/...apter3.jpg

Cool, when are you starting to build yours? Also, what ECU will you be using?