Installing 4AGZE in AE86

[Veiss]

Hi Knudsen,

I'm currently (or was until this winter at least) running an 165BHP 4AGZE with the modded 4AGE ECU.
I haven't had anything to complain about, I've mounted the intercooler ind the front, and haven't had any lag at all (tryed to connect the output from the supercharger to the inlet to see the difference).
Firstly let me say that the change was doable,

1. If you choose to get the modded ECU, you'll have to fit a distributer from an 4AGE.
2. I'm currently using a thermostat housing from a MR2. I had to build my own coolingsystem, and that was the thing that took most of my time.
3. You also need to solder some of the connectors from the 4AGZE (injectors, tempsensors and such) on the 4AGE wireharness, since the old 4AGE doesn't fit.
4. You'll also have to make your own costum generator mount, because the supercharger is placed where the the generator was, and in the same breath you need to either extend the original wireharnes for the generator or make a new from the battery.

I hope this helped, that's what I could come up with at the moment, but your more than welcome to cantact me if you've got any more qustions.