Non-standard brake master cilinder
11-07-2005, 12:06 AM
Post: #6
 
It doesnt look that much different from stock ae86 master cilinders..but that piece where the bolt of the cilinder stopper holds the cilinder in place looks like it's made especially for it to work in combination with the stopper.
Also the base looks a bit odd and has one hole more than the stock master cilinder.
My guess is that it's either an aftermarket part or it comes from a car that has a master cil. stopper from factory.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user


Messages In This Thread
Non-standard brake master cilinder - DaveW - 11-06-2005, 05:10 PM
[] - Ivan141 - 11-06-2005, 06:03 PM
[] - Ian.G - 11-06-2005, 08:27 PM
[] - Ian.G - 11-06-2005, 08:46 PM
[] - DaveW - 11-06-2005, 09:23 PM
[] - Ivan141 - 11-07-2005 12:06 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Brake advice - master cylinder mannix20vt 12 16,778 08-21-2017 03:21 PM
Last Post: Project D
  Early EDM non-cat 4A-GE 16v Bluetop Fails emissions (high co) Rascal21 41 41,752 08-21-2016 04:51 PM
Last Post: ray
  Correct connection brake master cylinder? bozu 5 8,447 07-26-2015 12:28 PM
Last Post: bozu
  Dimensions clutch master cylinder bozu 2 6,977 04-16-2015 07:11 AM
Last Post: bozu
  part numbers on standard cams Alex170984 10 12,575 09-19-2013 02:53 PM
Last Post: pack

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication