Help needed for Starlet KP61/62 4AGE conversion

[The Doctor]

you need to fit a hydraulic clutch (and everything needed to make it work of course ), because a K40/K50 gearbox has a cable clutch and won't bolt up to a 4A-GE, also don't know if it can hold up the power.

Also a T50 is longer then a K40/K50, so you need to shorten the driveshaft. And need to cut a hole in the tunnel, because the lever is a bit more backwards.
On my KE20 i can use a Carina TA12/TA14 2T driveshaft, dunno about the KP60.