New bits for hachi

[Ian.G]

Skassa,

the mintex part number is

MDB1198M1144

if you want them in 1155 compound just replace the last 4 numbers.
I haven't tried fitting them yet but they look the correct shape and size.

As for the s13 rears - I've never disassembled them but it works like this:

A bracket has been made that bolts onto the original caliper mounting points on the rear axle. This moves the caliper out to accommodate the s13 disk. As the s13 uses the same stud pattern as the ae86 so the disk just slides right onto the hub. The only other thing that appears to have been done is that a sleave has been made to fit in the centre hole of the disk as they are a slightly larger diameter...and I think thats about it.

I will try and get some photos if I do the pads this weekend - depends if we have time but if the rear suspension is coming off it will only be a 10 minute job to switch them (note to self : get new tub of copper/slip grease).