|
Head bolts: You decide.....
|
|
11-11-2020, 06:33 PM
(This post was last modified: 11-11-2020 06:38 PM by oldeskewltoy.)
Post: #9
|
|||
|
|||
|
RE: Head bolts: You decide.....
When using studs in a 16V you want to over drill the front, #1, exhaust side head bolt hole one step larger..... If you drill it down to just below the oil feed hole - blocking that hole is now impossible.
![[Image: AEU86 AE86 - RE: Head bolts: You decide.....]](https://gallery.ostportworks.com/albums/userpics/10005/oiling_mod_head_2_panel_annoted.jpg "AEU86 AE86 - RE: Head bolts: You decide.....") (11-10-2020 09:53 AM)FanIsHere Wrote: If it regards the 16v as well, then is that ok to reuse OEM head bolts or do I need new ones? FSM has a spec on headbolts.... if they measure up, and are not corroded, they should be able to be reused. Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Head bolts: You decide..... - oldeskewltoy - 05-31-2013, 11:18 PM
RE: Head bolts: You decide..... - FanIsHere - 11-10-2020, 09:53 AM
RE: Head bolts: You decide..... - Ivan141 - 11-10-2020, 11:48 AM
RE: Head bolts: You decide..... - oldeskewltoy - 11-11-2020 06:33 PM
Re: Head bolts: You decide..... - allencr - 06-01-2013, 06:28 AM
Re: Head bolts: You decide..... - oldeskewltoy - 06-01-2013, 06:13 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| ring gear bolts | DJexor | 3 | 7,379 |
12-26-2016 10:56 PM Last Post: totta Crolla |
|
| torque setting head cylinder bolts | izanagi | 1 | 6,358 |
05-29-2015 01:23 AM Last Post: oldeskewltoy |
|
| Broken bolts - Water pump | pack | 13 | 17,678 |
10-05-2011 08:02 PM Last Post: pack |
|
| Eibach camber bolts | totta Crolla | 4 | 6,727 |
11-17-2010 02:55 AM Last Post: assassin10000 |
|
| Use LocTite on Bolts ????? | juantonwan | 2 | 5,040 |
05-22-2010 05:30 PM Last Post: Eric |
|
User(s) browsing this thread: 1 Guest(s)