Head bolts: You decide.....
11-10-2020, 09:53 AM (This post was last modified: 11-10-2020 09:54 AM by FanIsHere.)
Post: #7
RE: Head bolts: You decide.....
Nice piece of information here since I am in the process of rebuilding my 16v.

I wanted to ask you guys if this information regards only the 20v (as I read above Hasselgren's answer including "VVT") or all of the 4AGs?

If it regards the 16v as well, then is that ok to reuse OEM head bolts or do I need new ones?

[Image: AEU86 AE86 - RE: Head bolts: You decide.....]

Follow: The story of my AE86
Visit this user's website Find all posts by this user


Messages In This Thread
Head bolts: You decide..... - oldeskewltoy - 05-31-2013, 11:18 PM
RE: Head bolts: You decide..... - FanIsHere - 11-10-2020 09:53 AM
RE: Head bolts: You decide..... - Ivan141 - 11-10-2020, 11:48 AM
[] - ditn - 05-31-2013, 11:28 PM
Re: Head bolts: You decide..... - allencr - 06-01-2013, 06:28 AM
[] - Lewy - 06-02-2013, 04:45 AM
[] - ditn - 06-02-2013, 10:54 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  ring gear bolts DJexor 3 7,354 12-26-2016 10:56 PM
Last Post: totta Crolla
  torque setting head cylinder bolts izanagi 1 6,330 05-29-2015 01:23 AM
Last Post: oldeskewltoy
  Broken bolts - Water pump pack 13 17,609 10-05-2011 08:02 PM
Last Post: pack
  Eibach camber bolts totta Crolla 4 6,706 11-17-2010 02:55 AM
Last Post: assassin10000
  Use LocTite on Bolts ????? juantonwan 2 5,019 05-22-2010 05:30 PM
Last Post: Eric

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication