|
CR Variables
|
|
04-30-2018, 05:48 PM
(This post was last modified: 04-30-2018 05:52 PM by oldeskewltoy.)
Post: #15
|
|||
|
|||
|
RE: CR Variables
Back a few years ago(8/14) when I designed a high comp piston for a client, I sent a bigport, and smallport piston into JE Piston to help in designing my pistons. I asked them to measure the pistons, and I got the following back from them....
-3.8cc 9.4:1 +0.25cc 10.3:1 The problem with this... is if you use the same variables for calculating compression ratio... you don't end up with 9.4:1, or 10.3:1 Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
CR Variables - Alex170984 - 04-20-2018, 12:02 AM
RE: CR Variables - Alex170984 - 04-20-2018, 11:02 AM
CR Variables - Bean - 04-20-2018, 05:14 PM
RE: CR Variables - Project D - 04-20-2018, 10:53 PM
CR Variables - Bean - 04-21-2018, 08:39 AM
RE: CR Variables - Alex170984 - 04-21-2018, 11:01 AM
RE: CR Variables - Project D - 04-21-2018, 02:32 PM
CR Variables - Bean - 04-21-2018, 05:38 PM
RE: CR Variables - Alex170984 - 04-22-2018, 11:04 AM
CR Variables - Bean - 04-22-2018, 11:38 AM
RE: CR Variables - oldeskewltoy - 04-23-2018, 06:04 AM
RE: CR Variables - Dave W - 04-23-2018, 03:00 PM
CR Variables - Bean - 04-23-2018, 05:02 PM
RE: CR Variables - Dave W - 04-24-2018, 01:47 PM
RE: CR Variables - oldeskewltoy - 04-30-2018 05:48 PM
RE: CR Variables - Project D - 04-30-2018, 06:32 PM
CR Variables - Bean - 04-30-2018, 07:38 PM
RE: CR Variables - oldeskewltoy - 04-30-2018, 08:44 PM
|
User(s) browsing this thread: 1 Guest(s)